Check out my website, RennSpeed Racing has finally gone live!
#1
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
Check out my website, RennSpeed Racing has finally gone live!
Been working really hard on this project for some time now and it has finally come to partial fruition. I am a CNC machinist by trade, it didn't take me long to figure out I could make parts for these cars that where either better/cheaper/new. I have a deal with my employer where I utilize excess machine capacity to manufacure my Porsche-related parts, works great for both of us.
So far I have a couple products that are for sale, and I have been shipping them out this week and past weekend. I have a couple more that are in production, but not quite finished yet and MANY more on the drawing board. All of these components are manufactured on CNC lathes/mills that are capable of resolving 0.0001 of an inch. Our "parent" company is in the business of manufacuring very precision components for a wide variety of industries - I do this kind of thing every day and I apply the same standards to my products.
Anyway, check it out - the website is under constant construction, I am adding to it every day so check back often. If you have a suggestion or would like to see a certain product be manufactured - let me know!
www.rennspeedracing.com
So far I have a couple products that are for sale, and I have been shipping them out this week and past weekend. I have a couple more that are in production, but not quite finished yet and MANY more on the drawing board. All of these components are manufactured on CNC lathes/mills that are capable of resolving 0.0001 of an inch. Our "parent" company is in the business of manufacuring very precision components for a wide variety of industries - I do this kind of thing every day and I apply the same standards to my products.
Anyway, check it out - the website is under constant construction, I am adding to it every day so check back often. If you have a suggestion or would like to see a certain product be manufactured - let me know!
www.rennspeedracing.com
#4
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
I'll have to check into that - there will be some parts that I simply cannot make with the machines I have, otherwise I will give just about every idea a shot.......
#7
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
Haha, you caught me!
Until now, I have NEVER in my life been involved with the construction of a website in any way. This has been a major learning experience for me! Should be fixed now......
Until now, I have NEVER in my life been involved with the construction of a website in any way. This has been a major learning experience for me! Should be fixed now......
Trending Topics
#9
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
You know, I made one of those for myself a long time ago and made the job alot easier. I eventually gave it to a rennlister - then it dawned on me to offer them for sale.
#13
Set to Full-Auto
Rennlist Member
Rennlist Member
Thread Starter
Thanks Wayne!
The SS hatch pins should be in production by the end of the day, then I have to get them passivated - takes about 15 minutes once I deliver them. Anyway, expect to see them on the site in the next day or two.
The SS hatch pins should be in production by the end of the day, then I have to get them passivated - takes about 15 minutes once I deliver them. Anyway, expect to see them on the site in the next day or two.