WTB: Tial wastegate 40mm valve seat, air fittings, mounting hardware
#1
Instructor
Thread Starter
Join Date: Mar 2005
Location: Colorado
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
TiAL wastegate info needed (was WTB 40mm parts)
--Edited subject for new question---
Hoping to find used, but let me know if you know of a place to get this stuff at a reasonable price.
Hoping to find used, but let me know if you know of a place to get this stuff at a reasonable price.
Last edited by Cra$h; 10-13-2006 at 12:06 PM.
#3
Instructor
Thread Starter
Join Date: Mar 2005
Location: Colorado
Posts: 187
Likes: 0
Received 0 Likes
on
0 Posts
Well, found what I needed...
Only to find out, they weren't all I needed apparently............
I have a 40mm TiAL, and ASSumed it was the same bolt spacing as stock since they look almost identical unless you go and do something irrational like measure them...
So, is there a direct bolt on TiAL? Is it the 46mm? If anyone knows of an adapter for the 40mm, please let me know. BTW, I know of the one for the 38mm. That doesn't help me.
TIA!
Only to find out, they weren't all I needed apparently............
I have a 40mm TiAL, and ASSumed it was the same bolt spacing as stock since they look almost identical unless you go and do something irrational like measure them...
So, is there a direct bolt on TiAL? Is it the 46mm? If anyone knows of an adapter for the 40mm, please let me know. BTW, I know of the one for the 38mm. That doesn't help me.
TIA!