K-29 compressor wheel dimensions?
#1
Three Wheelin'
Thread Starter
K-29 compressor wheel dimensions?
Does anyone have this info? since I have the turbo out, Im trying to figure out if it has a k29 wheel inside a k27 housing, the turbo was supposedly done by powerhaus, but i havent been able to get a hold of them yet.
Last edited by M Danger; 09-19-2006 at 09:01 PM.
#3
Addict
Rennlist Member
Rennlist
Small Business Partner
Rennlist Member
Rennlist
Small Business Partner
I'm pretty sure he is talking about a k29 compressor wheel...
From what I can find on the K29 (not much). The inducer is 60mm and the exducer is 86.5
Rogue
From what I can find on the K29 (not much). The inducer is 60mm and the exducer is 86.5
Rogue
#5
Originally Posted by Rogue_Ant
I'm pretty sure he is talking about a k29 compressor wheel...
From what I can find on the K29 (not much). The inducer is 60mm and the exducer is 86.5
Rogue
From what I can find on the K29 (not much). The inducer is 60mm and the exducer is 86.5
Rogue
I wanted to know what ex housing is on there.
Trending Topics
#8
Addict
Rennlist Member
Rennlist Member
Where could I buy K29 comp. wheel? I don't find it anywhere.
#9
Three Wheelin'
29, compresser, compressor, cpmpressor, dimensions, housing, inducer, k27, k29, size, sizes, sizw, turbine, turbo, wheel