Group Buy 4 Dynatech-Strut Bars & Camber Plates-Get 'em while you can
09-16-2006, 02:28 AM
#19
Rennlist Member
Thread Starter
Originally Posted by potent951turbo86
What are the payment details etc. for the bars, and any idea on shipping costs?
Also, I believe the shipping is around 25 dollars for the bar.
I am going to solidify the list this weekend to see who is really on board etc.
Regards
Ed
09-16-2006, 02:33 AM
#20
Rennlist Member
Thread Starter
Originally Posted by georgeleroy
Eddie--
Sounds like the strut bars are probably all spoken for, but please list me for one anyway in case you have some that back out. Thanks.
--Greg
Sounds like the strut bars are probably all spoken for, but please list me for one anyway in case you have some that back out. Thanks.
--Greg
I am going to sure up the list this weekend and will let you know
I will send you a PM ...
I have done a number of GB and there are usually some who decide otherwise....
So we will see
Regards
Ed
09-20-2006, 03:03 PM
#21
Rennlist Member
Thread Starter
Payment info for Group Buy
Hey Guys
I will be posting the info as to what is needed to complete this GB transaction
For those who expressed interest please PM me asap so I have the final list.
Don't PM me until I post the required payment info. There are a # of people who expressed interest but there are only so many bars to go around.
I want to allow those who got in late to have a chance to get these, if the others who orig. signed up, are not sure they want to go ahead.
I will post the info in a hour or two THEN the PM's can flow to me...
Thanks guys and thanks for being so patient...
Kind regards
Ed
I will be posting the info as to what is needed to complete this GB transaction
For those who expressed interest please PM me asap so I have the final list.
Don't PM me until I post the required payment info. There are a # of people who expressed interest but there are only so many bars to go around.
I want to allow those who got in late to have a chance to get these, if the others who orig. signed up, are not sure they want to go ahead.
I will post the info in a hour or two THEN the PM's can flow to me...
Thanks guys and thanks for being so patient...
Kind regards
Ed
09-20-2006, 07:05 PM
#23
Rennlist Member
Thread Starter
Originally Posted by evil 944t
Hurry up Ed, I want those damn parts!!! just kidding......lol....
Thanks Ed!!
Thanks Ed!!
Ok
Here are the details! Guys please PM me that you are ready to go and confirm what it is you want
Ed,
The payment can be sent to our paypal account which is 968@earthlink.net, remember that its $25.00 each for shipping a brace and $25.00 for shipping camber plates.
If you can have everyone send me an email to this address
with the information on the owners cars as follows, it will help us out greatly,
I can then make up a spead sheet and keep everything in order.
(model) EG; 951
(year) EG; 1988
(Strut type Only need for Camber plate Information) EG; Koni, KW, Bilstein, stock OEM, M030, or other.
Best Regards,
Scott[B]
Thanks Guys for hanging it there
Ed
09-21-2006, 02:24 PM
#24
Rennlist Member
Thread Starter
Ok Guys
Not to be a PITA but I really would like to get this over with
You have all been more than patient but
I need to hear from you that you have emailed Scott and what the final count is
I have heard so far from
Crazy Eddie- Crazy Eddie Both- Camber Plates and Strut Brace 1 s + 1 c
boerge- Boerge - Strut Brace 1s
thingo - Thingo - Both 1s + 1c
SoloRacer- SoloRacer-I would be in for a 944 Turbo brace 1s
theedge- Theedge Strut Brace 1s
Ski 1c
ringo951 1s
Waiting List
georgeleroy
Not to be a PITA but I really would like to get this over with
You have all been more than patient but
I need to hear from you that you have emailed Scott and what the final count is
I have heard so far from
Crazy Eddie- Crazy Eddie Both- Camber Plates and Strut Brace 1 s + 1 c
boerge- Boerge - Strut Brace 1s
thingo - Thingo - Both 1s + 1c
SoloRacer- SoloRacer-I would be in for a 944 Turbo brace 1s
theedge- Theedge Strut Brace 1s
Ski 1c
ringo951 1s
Waiting List
georgeleroy
09-21-2006, 02:51 PM
#26
Rennlist Member
Thread Starter
Originally Posted by Rob 3
I'll take a strut brace and camber plates as well if not too late.
But there may be more avail as I have not heard from everyone yet
Please PM me and I will get back to you by Fri
Regards
Ed
09-21-2006, 03:05 PM
#28
Rennlist Member
Thread Starter
PM and ordering info
Here are the details! Guys please PM me that you are ready to go and confirm what it is you want
Ed,
[B]The payment can be sent to our paypal account which is 968@earthlink.net, remember that its $25.00 each for shipping a brace and $25.00 for shipping camber plates.
If you can have everyone send me an email to this address
with the information on the owners cars as follows, it will help us out greatly,
I can then make up a spead sheet and keep everything in order.
(model) EG; 951
(year) EG; 1988
(Strut type Only need for Camber plate Information) EG; Koni, KW, Bilstein, stock OEM, M030, or other.
Best Regards,
Scott
Ed,
[B]The payment can be sent to our paypal account which is 968@earthlink.net, remember that its $25.00 each for shipping a brace and $25.00 for shipping camber plates.
If you can have everyone send me an email to this address
with the information on the owners cars as follows, it will help us out greatly,
I can then make up a spead sheet and keep everything in order.
(model) EG; 951
(year) EG; 1988
(Strut type Only need for Camber plate Information) EG; Koni, KW, Bilstein, stock OEM, M030, or other.
Best Regards,
Scott
09-23-2006, 07:25 PM
#30
Rennlist Member
Thread Starter
You Must get your info emailed to Scott if you want to be included!!
Hey Guys
Scott has got a list of people that have emailed him 968@earthlink.net
Some names are missing that I have
Hopefully by Sunday, I will have the updated list
PM 's sent to Evil 944t - Dave and theedge - Brian
There may be others as well
Regards
Ed
Scott has got a list of people that have emailed him 968@earthlink.net
Some names are missing that I have
Hopefully by Sunday, I will have the updated list
PM 's sent to Evil 944t - Dave and theedge - Brian
There may be others as well
Regards
Ed