Info needed on Saturn exhaust manifold studs
#16
Rennlist Member
Thread Starter
Originally Posted by Jon Moeller
951Boost,
Any chance you have a different P/N for NAPA? When I brought them that P/N, they couldn't find anything close.
Thanks,
Jon
Any chance you have a different P/N for NAPA? When I brought them that P/N, they couldn't find anything close.
Thanks,
Jon
Skip
#17
Rennlist Member
Join Date: Oct 2005
Location: Up High in the Colorado Rockies
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Sorry for the bad info guys. That is the number that the counter guy put down on the receipt. Work "might" be slow tomorrow or Friday I'll see if I can go awol for about 30 mins and bring the stud with me to NAPA. Will post info asap.
I apologize for any invonveniences.
I apologize for any invonveniences.
#20
Three Wheelin'
Just call the local saturn dealer, if they dont have in stock, they ship to you for free, at least the one I went to did. They were a little over a dollar each this time.
#21
Rennlist Member
Join Date: Oct 2005
Location: Up High in the Colorado Rockies
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by MPD47
Any update on that Napa number? My NAPA guys couldnt find anything either.
Sorry for the delay guys but I don't have good news. I went to NAPA on Monday (was sick all W/E) and the sharp counter guy that works there and got me the studs before wasn't there. Some other guy tried to help me and he couldn't match up the # (had plenty of regular, proper size studs but not with the torx end). He took all the info and promised to get back to me (even left him an old Saturn stud). He hasn't called me back.
I will try to stop in again this W/E but can't promise 'cause I'll have company in from out of state and need to play host/tour guide.
My apologies for the disappointment
#22
Track Day
Join Date: May 2006
Location: norfolk england
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
i have currently got the headers undone on my 944 turbo.it would make a lot of sense to replace my studs with these saturn type problem is i'm in uk have you made any prgress
#23
Questions?
Originally Posted by gregeast
I think I paid ~$8.00 for a complete set.
The oem studs are aluminum. Any issues using a steel coated part on a aluminum head? I was also thinking of using the Saturn studs on my block (belt tensioner)
thanks,
#29
Defending the Border
Rennlist Member
Rest In Peace
Rennlist Member
Rest In Peace
PHP Code:
It's an upgrade from plastic studs!
Buck,
I have a set of, low miles, ceramic coated ones if you're interested??? Plastic ones , that is.