M030 Front Hubs
#1
M030 Front Hubs
Hi All,
Does anybody have any front hubs and spindles (late 944 Turbo 250, 944 Turbo M030 or 968CS M030) that will accept the later big callipers?
If you can help, please send an e-mail to andrew@promaxmotorsport.com
Regards,
Andrew
www.promaxmotorsport.com
+44 (0)7831 393633
Does anybody have any front hubs and spindles (late 944 Turbo 250, 944 Turbo M030 or 968CS M030) that will accept the later big callipers?
If you can help, please send an e-mail to andrew@promaxmotorsport.com
Regards,
Andrew
www.promaxmotorsport.com
+44 (0)7831 393633
Last edited by promax_motorsport; 05-23-2006 at 08:27 AM.
#5
Hi All,
Sorry - it was hubs and spindles that I required. Does anybody have any complete front hubs and spindles (late 944 Turbo 250, 944 Turbo M030 or 968CS M030) that will accept the later big callipers?
If you can help, please send an e-mail to andrew@promaxmotorsport.com
Sorry - it was hubs and spindles that I required. Does anybody have any complete front hubs and spindles (late 944 Turbo 250, 944 Turbo M030 or 968CS M030) that will accept the later big callipers?
If you can help, please send an e-mail to andrew@promaxmotorsport.com
#6
Andrew,
What later calipers do you mean? Do you have now 220hp version spindles/hub? If you change to 951S spindles/hub you are not able to use easily later model (monoblock) calipers.You can only use old design 951S or 993TT Big Red calipers. If you would like to have GT3/GT2 calipers (like me and my friend Pete have) it's much easier to fabricate adapters to 220hp spindle. If you would like to have more information PM me.
Here's GT2 calipers under Pete's 951
Adapters for 951 GT2 front/GT3 rear caliper conversion
What later calipers do you mean? Do you have now 220hp version spindles/hub? If you change to 951S spindles/hub you are not able to use easily later model (monoblock) calipers.You can only use old design 951S or 993TT Big Red calipers. If you would like to have GT3/GT2 calipers (like me and my friend Pete have) it's much easier to fabricate adapters to 220hp spindle. If you would like to have more information PM me.
Here's GT2 calipers under Pete's 951
Adapters for 951 GT2 front/GT3 rear caliper conversion