Dyno sheets from lightly modded 951
#16
Rennlist Member
Local guy here in OKC has basically the same setup stock with Autothority chips. His first dyno chart looked almost exactly like yours. He contacted Authority and sent them the chips and dyno charts. They remapped the chips for $100 (original proof of purchase required).
They tweaked the midrange and he gained like 15 peak hp and 25-30 ftlbs of torque if memory serves. We were just happy to see it wasn't going so pig rich in the midrange.
Don't know if that is a possibility with Weltmeister chips.
They tweaked the midrange and he gained like 15 peak hp and 25-30 ftlbs of torque if memory serves. We were just happy to see it wasn't going so pig rich in the midrange.
Don't know if that is a possibility with Weltmeister chips.
#17
Burning Brakes
Thread Starter
Join Date: Mar 2004
Location: Seattle
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
I have not seen anybody advertising the chips. I had to search forever just to find the performance chart. I finally found it on an individual's car page, not in an add.
Maybe Vitesse?
Lou
Maybe Vitesse?
Lou
#20
Just what i was looking for. I have an 88 with k/26-6 and i was wondering if i went to a k-26-8 and put some good chips in what kind of hp would o get. Yours was more that i thought that set up would give. So i am now going to seach for the k-26-8 and get some new chips . ANYONE HAVE A K26-8 FOR SALE?
#21
Addict
Rennlist
Lifetime Member
Rennlist
Lifetime Member
Join Date: May 2001
Location: New Jersey Shore
Posts: 901
Likes: 0
Received 0 Likes
on
0 Posts
K26/8 would be nice but you can do OK with
K26/6 + 3.0 bar FPR + shims + chips + 18 psi =285hp/330tq (estimated)
Mine runs nice
...but of course K26/8 would be better
:-)
K26/6 + 3.0 bar FPR + shims + chips + 18 psi =285hp/330tq (estimated)
Mine runs nice
...but of course K26/8 would be better
:-)
#23
Rennlist Member
Join Date: Oct 2002
Location: Melbourne, Australia
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JBrown
Just what i was looking for. I have an 88 with k/26-6 and i was wondering if i went to a k-26-8 and put some good chips in what kind of hp would o get. Yours was more that i thought that set up would give. So i am now going to seach for the k-26-8 and get some new chips . ANYONE HAVE A K26-8 FOR SALE?
#25
Rennlist Member
Join Date: Oct 2002
Location: Melbourne, Australia
Posts: 1,110
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by JBrown
i have a spare k26/6 what do you think i should do?
bob seems to be a popular choice.
also here's the clarks-garage writeup on the k27 installation
http://www.clarks-garage.com/shop-manual/eng-16.htm
#26
Burning Brakes
Thread Starter
Join Date: Mar 2004
Location: Seattle
Posts: 837
Likes: 0
Received 0 Likes
on
0 Posts
"Nice numbers Lou, i can solve the mid-range richness if its bugging you - sent you an email."
It is not bugging me much, the car runs great and is plenty fast enough. If gas hits $3/gal I'll email you.
Lou
It is not bugging me much, the car runs great and is plenty fast enough. If gas hits $3/gal I'll email you.
Lou