Rent 9201 tool?
#1
Pro
Thread Starter
Join Date: Jan 2005
Location: RSVL, CA
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Rent 9201 tool?
Howdie,
Thius may be a stupid question, but I was wondering if it were at all possible to rent this 9201 tool from a kragen or autozone? I tried searching, but didn't really come up with anything that helps me here.
THanks,
Jared
Thius may be a stupid question, but I was wondering if it were at all possible to rent this 9201 tool from a kragen or autozone? I tried searching, but didn't really come up with anything that helps me here.
THanks,
Jared
#2
Addict
Rennlist Member
Rennlist Member
Nope. There used to be a tool rental club here but it died off. It was taking too long to get the tool back from the renters. It's a $300-$400 tool, and a delicate mechanisim. Not the sort of thing you can rent cheaply. The Krikit is pretty good though and quite cheap.
-Joel.
-Joel.
#3
Mexican Ambassador
Lifetime Rennlist
Member
Lifetime Rennlist
Member
dont think so, you might be able to borrow one from a local lister. maybe SF or something.
do you need a tensioning or a whole belt replacement?
if you need a tensioning, i can reccomend a shop in sac that did mine for decently cheap.
PS- i know UOP is out for the season, where u at, dawg? j00 gotta meet me at da street racez and ****z!
ok, i'm done
do you need a tensioning or a whole belt replacement?
if you need a tensioning, i can reccomend a shop in sac that did mine for decently cheap.
PS- i know UOP is out for the season, where u at, dawg? j00 gotta meet me at da street racez and ****z!
ok, i'm done
#5
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
#6
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: A suburb of Silicon Valley, CA
Posts: 2,099
Likes: 0
Received 7 Likes
on
3 Posts
it's just a re-tensioning
Highboost,
When I purchased the 9201 tool my logic was this....
1. A belt job at the time cost $300.
2. The tool at the time cost $700 (1986).
3. After two self performed belt jobs, the tool would pay for itself.
4. I plan to never sell my 951.
How many belt jobs have I done? 15-20. When I do repairs like valve job, head gasket, water pump, radiator replacement, front seals, all require belt removal and retention. Was the purchase worth the cost? YES. Do I want to rent my 9201 tool? No.
Last edited by Bill; 12-20-2005 at 07:30 PM.
#7
Pro
Thread Starter
Join Date: Jan 2005
Location: RSVL, CA
Posts: 642
Likes: 0
Received 0 Likes
on
0 Posts
Thats good thinking Bill, I never had to take off any belts for radiator replacement, but I see your logic and it seems right to me. I will probably just end up purchasing the tool because it will pay for itself soon enough
Trending Topics
#8
Addict
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by Bill
Uuummmm......much more than this it is! A path to the bent valve side of the force you see. This future is cloudy, but $2,000 it could be.
Highboost,
When I purchased the 9201 tool my logic was this....
1. A belt job at the time cost $300.
2. The tool at the time cost $700 (1986).
3. After two self performed belt jobs, the tool would pay for itself.
4. I plan to never sell my 951.
How many belt jobs have I done? 15-20. When I do repairs like valve job, head gasket, water pump, radiator replacement, front seals, all require belt removal and retention. Was the purchase worth the cost? YES. Do I want to rent my 9201 tool? No.
Highboost,
When I purchased the 9201 tool my logic was this....
1. A belt job at the time cost $300.
2. The tool at the time cost $700 (1986).
3. After two self performed belt jobs, the tool would pay for itself.
4. I plan to never sell my 951.
How many belt jobs have I done? 15-20. When I do repairs like valve job, head gasket, water pump, radiator replacement, front seals, all require belt removal and retention. Was the purchase worth the cost? YES. Do I want to rent my 9201 tool? No.
#9
Race Car
Join Date: Jun 2003
Location: Albany, CA: celebrating 100 years of independence from Berkeley, CA
Posts: 4,887
Likes: 0
Received 2 Likes
on
2 Posts
Originally Posted by HIGHBOOST
Thats good thinking Bill, I never had to take off any belts for radiator replacement, but I see your logic and it seems right to me. I will probably just end up purchasing the tool because it will pay for itself soon enough
#10
Rennlist Member
Join Date: Oct 2005
Location: Up High in the Colorado Rockies
Posts: 438
Likes: 0
Received 0 Likes
on
0 Posts
So with the 9201 being that it is so delicate & all, how often does it need to be recalibrated & where does one get it done (dealer?)? Also, other than a place like Sunset that offers decent discounts are there any other sources with good prices for the tool? (Thinking about buying one)
ThanX
ThanX
#11
Mexican Ambassador
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Highboost, you'd have a PM, but your box is full, lol.
Frank's Auto in Sac does almost all the work on my car (i only let them do oil changes cuz it's in there every 3k or so miles, so it's kind of a "what the hell, save me some hassle" type deal), but yeah, they've done all the work on my 951 and my old n/a, and they've never done anything wrong with my car, and they've always got 911's and various german cars in there so if your car is waiting outside, it's a good opportunity for a gratuitous Porsche shot. not to mention a ferrari 308 or 348 in there, and some 356 race cars and i think a 550 racer. REALLY cool place just to hang out if they let you.
numbers-
916-452-0917
5220 Folsom Boulevard
Sac, 95819
Talk to Frank or Nick (nick is younger, about my height, about my size, drives a blue E36 M3 coupe).
Frank's Auto in Sac does almost all the work on my car (i only let them do oil changes cuz it's in there every 3k or so miles, so it's kind of a "what the hell, save me some hassle" type deal), but yeah, they've done all the work on my 951 and my old n/a, and they've never done anything wrong with my car, and they've always got 911's and various german cars in there so if your car is waiting outside, it's a good opportunity for a gratuitous Porsche shot. not to mention a ferrari 308 or 348 in there, and some 356 race cars and i think a 550 racer. REALLY cool place just to hang out if they let you.
numbers-
916-452-0917
5220 Folsom Boulevard
Sac, 95819
Talk to Frank or Nick (nick is younger, about my height, about my size, drives a blue E36 M3 coupe).
#12
Addict
Rennlist Member
Rennlist Member
Join Date: May 2001
Location: A suburb of Silicon Valley, CA
Posts: 2,099
Likes: 0
Received 7 Likes
on
3 Posts
how often does it need to be recalibrated
You can purchase a calibration bar for the tool. Put the bar into the tool, bend the bar by operating the tool and read the gauge. You can turn the gauge face to bring the tool back into spec. The tool is not that delicate, just don't drop it. And calibration is not required very often, but is a simple check.
#13
Before I bought mine I rented one from these guys a couple of times:
http://www.devek.net/index.php
Don't know if they still do it, but it's probably worth a call.
As for buying one, watch eBay... they come up every once in a while.
http://www.devek.net/index.php
Don't know if they still do it, but it's probably worth a call.
As for buying one, watch eBay... they come up every once in a while.