Guess my whp
#16
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
Based on what customers reported, Stage 2 at 15psi is anywhere from 310-330rwhp. Many factors affect this: WG, condition of head, fine tuning.. you get the picture..
Peak numbers are not what's important. The large area under the power curve is what you are after..
If the shop doing the fine tuning has any question, have them call me.. Best before strapping the car to the dyno!
Keep in mind, with the latest software (chip-board), you have 2 settings (pump & race fuel) make sure you are using the correct maps.
Email dyno chart or better yet the actual disk file, I will be able to review it and will send you my comments.
Peak numbers are not what's important. The large area under the power curve is what you are after..
If the shop doing the fine tuning has any question, have them call me.. Best before strapping the car to the dyno!
Keep in mind, with the latest software (chip-board), you have 2 settings (pump & race fuel) make sure you are using the correct maps.
Email dyno chart or better yet the actual disk file, I will be able to review it and will send you my comments.
#18
Originally Posted by hosrom_951
Also those B&B headers should make a difference
It's widely known that the stock 951 exhaust headers were designed for torque. The question for Project 951 was whether we would get more top-end horsepower and more midrange torque with a given exhaust header. In Part 4 (ec, 04/04), my 951 got the torque but lost a few ponies with the B&B headers (granted, the power came back with the addition of the B&B cat-back exhaust).
#20
Mexican Ambassador
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by streckfu's951
daniel, you rotten fool. i was gonna link that same article. i have the entire project 951 series engraved in my mind.
#21
Originally Posted by 951Obsession
daniel, you rotten fool. i was gonna link that same article. i have the entire project 951 series engraved in my mind.
All those burritos are slowing you down, Juan.
#22
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Point is, there will be a difference as i mentioned.
Note: One car being tested isn't qualified as reliable data, especially since that specific car needed some major internal work (as mentioned by Tim).
You need several results
Note: One car being tested isn't qualified as reliable data, especially since that specific car needed some major internal work (as mentioned by Tim).
You need several results
#23
Originally Posted by hosrom_951
Point is, there will be a difference as i mentioned.
Note: One car being tested isn't qualified as reliable data, especially since that specific car needed some major internal work (as mentioned by Tim).
You need several results
Note: One car being tested isn't qualified as reliable data, especially since that specific car needed some major internal work (as mentioned by Tim).
You need several results
I was citing an example, not trying to counter your statement. It was the only example of a documented B&B header dyno run.
#24
Mexican Ambassador
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by streckfu's951
I was citing an example, not trying to counter your statement. It was the only example of a documented B&B header dyno run.
i'm assuming if the boost were turned up, it'd be a different story, werent they running like, 7 psi on that test?
#26
"full 3" exhaust system, Stage II MAF with Mafterburner piggyback system, 3 bar fuel regulator, and an HKS electronic boost controller"
This was taken from our blog we got 290 at the rear wheels and with a little fine tuning got it up to 300.8 So everyone elses claims sound about right.
Aaron Rubenking
ImagineAuto Inc.
www.imagineauto.com
Ask me about parts for your other car!!
View our Christmas sale @ Imagineauto.com
This was taken from our blog we got 290 at the rear wheels and with a little fine tuning got it up to 300.8 So everyone elses claims sound about right.
Aaron Rubenking
ImagineAuto Inc.
www.imagineauto.com
Ask me about parts for your other car!!
View our Christmas sale @ Imagineauto.com
#28
Originally Posted by 951Obsession
i love how HP actually went DOWN, with like, a 2 hp gain somewhere in the midrange or something.
i'm assuming if the boost were turned up, it'd be a different story, werent they running like, 7 psi on that test?
i'm assuming if the boost were turned up, it'd be a different story, werent they running like, 7 psi on that test?
Very true. They didn't turn the boost up until they tested the SFR headers.
#29
Racer
Thread Starter
Join Date: Nov 2003
Location: NorCal
Posts: 440
Likes: 0
Received 0 Likes
on
0 Posts
So it looks like I should be in the 300+ range then. I am running 55# injectors as recommended. I can't wait to get my car back, too bad I have to go out of town for a few days Anyways I'll post back with all the results once I get them.
#30
Mexican Ambassador
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Originally Posted by streckfu's951
Very true. They didn't turn the boost up until they tested the SFR headers.
note- i apologize to any gypsies that might have been on this forum and read that last remark and been offended.