NOT F-ING COOL!!!!!!
11-19-2005, 11:42 AM
#1
Banned
Thread Starter
NOT F-ING COOL!!!!!!
On my way from the gas station (filling with 93 octane ****water) I see my Defi boost guage bounce off the 35 PSI limit. I was looking down at it to check boost level because I had just turned it way down.
New AN line came off the adapter at the boost tube! Not cool.
Hopefully there was enough good fuel in the line as I was only 3 miles from the station. Egt's are normal.
New AN line came off the adapter at the boost tube! Not cool.
Hopefully there was enough good fuel in the line as I was only 3 miles from the station. Egt's are normal.
11-19-2005, 12:14 PM
#4
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Hey Jim, I just received a email from you know, who asking me if I can deliver a picture for you and since I don't have your email i can only post it here. You know who, doesn't want to post on this forum anymore. Anyway here is your picture.
Trending Topics
11-19-2005, 03:14 PM
#9
Three Wheelin'
Join Date: Sep 2004
Location: Tennesee
Posts: 1,269
Likes: 0
Received 0 Likes
on
0 Posts
OT , I like the look without the cap and rotor. Looks like you cut the rear cam sprocket cover off,Nice!
Were's the wasted spark mounted?
Hope the 35psi spike didn't blow anything.
Were's the wasted spark mounted?
Hope the 35psi spike didn't blow anything.
11-19-2005, 03:18 PM
#11
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Jim, I am sorry dude but you know who keeps insisting about me posting that picture. So here it's the picture ST doesn't want you to see.
11-19-2005, 03:22 PM
#12
Drifting
Join Date: Jan 2004
Location: Michigan
Posts: 2,023
Likes: 0
Received 0 Likes
on
0 Posts
I bounced the needle of my 30psi gauge a few times when I was having trouble getting the hoses to stay on my wastegate. Hasn't done any damage so far. I doubt this would cause any issues as long as it was just a quick boost spike. Now sustaining that high of boost with anything less then 110 race gas would certainly be dangerous 
11-19-2005, 03:54 PM
#14
Defending the Border
Rennlist Member
Rest In Peace
Rennlist Member
Rest In Peace
When I first installed my EBC I had the max boost setting incorrect. With the new silicone couplers installed and tight I was able to pop the turbo to cooler coupler after I put too much foot into it!!
Luckly my headgasket is only a year old.
Luckly my headgasket is only a year old.
