GT3 Seat Rails for a 951
09-22-2005, 11:48 AM
#1
Race Car
Thread Starter
Join Date: May 2005
Location: Being censored by a Moderator
Posts: 4,074
Likes: 0
Received 1 Like
on
1 Post
GT3 Seat Rails for a 951
I'm trying to get GT3 seats into a 951 
, does anyone know what has to be done to either use the existing GT3 rails, or adapt 993/951 rails to the seat (I was told some time ago they are basically the same. Who or what needs to conform to whom is the issue at hand. OR can I just use the GT3 rails with no problem...(stupid question I know, but its worth asking). Please advise... 
, does anyone know what has to be done to either use the existing GT3 rails, or adapt 993/951 rails to the seat (I was told some time ago they are basically the same. Who or what needs to conform to whom is the issue at hand. OR can I just use the GT3 rails with no problem...(stupid question I know, but its worth asking). Please advise...
09-22-2005, 02:34 PM
#2
Addict
Rennlist Member
Rennlist Member
Join Date: Dec 2001
Location: Virginia Beach
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
I believe that they make a GT3 seat that is a direct bolt into the 993. This seat will bolt up directly to the 951. You can try to search the 993 forum because I know there are several guy on there who are running GT3 seats. Good luck.
