Misfire/backfire??
08-13-2005, 01:23 PM
#1
Drive-by provocation guy
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
Misfire/backfire??
I am getting a misfire/backfire about 4-5K rpm and seems more so in the higher gears and NOT boost dependant.
I had this happen before and just needed new cables. Got new cables now (BERU) and plugs are fairly new (NGK). However cap and rotor are a few years old.
AND, this first happened last night after a couple "hard" runs, i.e. got a little deep into the revs once or twice, but nothing major.
Any ideas???
I had this happen before and just needed new cables. Got new cables now (BERU) and plugs are fairly new (NGK). However cap and rotor are a few years old.
AND, this first happened last night after a couple "hard" runs, i.e. got a little deep into the revs once or twice, but nothing major.
Any ideas???
08-13-2005, 10:55 PM
#3
Drive-by provocation guy
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Apr 2002
Location: NAS PAX River, by way of Orlando
Posts: 10,439
Likes: 0
Received 0 Likes
on
0 Posts
FOUND IT!!
It was my new/used BERU wires. When out and let it run in the dark and looked like a lightning storm going thorugh the wires.
It was my new/used BERU wires. When out and let it run in the dark and looked like a lightning storm going thorugh the wires.
