msd wires: what to buy
06-21-2005, 12:15 AM
#1
Racer
Thread Starter
Join Date: May 2002
Posts: 325
Likes: 0
Received 0 Likes
on
0 Posts
msd wires: what to buy
I am trying to find a set of msd wires but no one seems to sell them for 944 turbos - even the msd website stated "not applicable" when it came to 944 wires. Who are you guys buying your msd wires from and under what stock or part number?
06-21-2005, 02:05 AM
#4
Rennlist Member
Where, may I ask, Eyal ?
Looks like I need a new set
Tell me . with a stage II kit from jJohn does it really matter if I go with stock wires
Hope to be making 350 ( big hope ) at 15psi
thanks
regards
Ed
Looks like I need a new set
Tell me . with a stage II kit from jJohn does it really matter if I go with stock wires
Hope to be making 350 ( big hope ) at 15psi
thanks
regards
Ed
06-21-2005, 02:08 AM
#6
Rennlist Member
Oh sorry from you !!
Got it ..
Regards
Ed
Got it ..
Regards
Ed
06-21-2005, 02:42 AM
#7
Nordschleife Master
Join Date: Aug 2003
Location: Los Angeles
Posts: 9,558
Likes: 0
Received 0 Likes
on
0 Posts
Well, I'm working on a little resale thing... Not much mention on rennlist until I have the project finished and I am a rennlist sponsor, but I will be the direct seller. I have been busy! 
~Eyal
~Eyal
Trending Topics
06-21-2005, 03:56 AM
#8
Rennlist Member
That's great Good luck !
Is there any shot that the Magnecore 8.5mm comes in black
I have the red but the # 4 wire pulled out because its almost impossiable to pull without a wire puller
Regards
Ed
Is there any shot that the Magnecore 8.5mm comes in black
I have the red but the # 4 wire pulled out because its almost impossiable to pull without a wire puller
Regards
Ed
06-21-2005, 04:18 AM
#10
Nordschleife Master
Join Date: Aug 2003
Location: Los Angeles
Posts: 9,558
Likes: 0
Received 0 Likes
on
0 Posts
I'll have to get back to you on both those questions tomorrow. (Hey, haven't even opened the site yet!) but i do not think the 8.5 come in black. As for beru connections, no idea.
~Eyal
~Eyal
06-21-2005, 04:19 AM
#11
Rennlist Member
thx
ps Eyal
What vac hose size did you go with 4mm ?
regards
Ed
Edit also did the 2.25 on the hard pipes fit tight ?? they are 2.5 I thought
ps Eyal
What vac hose size did you go with 4mm ?
regards
Ed
Edit also did the 2.25 on the hard pipes fit tight ?? they are 2.5 I thought
06-21-2005, 04:46 AM
#13
Addict
Rennlist Member
Rennlist Member
Join Date: Nov 2002
Location: right next to the right one
Posts: 2,486
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by NZ951
The magnecors dont have Beru connectors, the resistence is in the wires, not connectors.
So the wires will have different resistance? (different lengths).
Are they a good replacement for stock if one needs to get new wires?
06-21-2005, 04:47 AM
#14
Nordschleife Master
Join Date: Aug 2003
Location: Los Angeles
Posts: 9,558
Likes: 0
Received 0 Likes
on
0 Posts
the 2.25 fit somewhat tight on the intercooler, took a bit of effort to get em all the way back, but they were almost too large for the stock IC pipe... they seal fine, but I would NOT go larger then 2.25 for the IC pipes. The vac hose I have came out of the myswiss kit, i think its somewhere around 4mm.
~Eyal
~Eyal
06-21-2005, 04:48 AM
#15
Race Director
Yes they have slightly different resistence, I dont really think it matters that much. LOTS of people use the KV85's with no worries, I would say they are the most popular aftermarket option by far.