fuchs
#17
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Shaheed: Where did you look at the 17" Fuchs that fit the '86? from the 911?? I was told that there would be fittiment issues due to the brake caliper clearance.
I am running the stock 951 Fuchs on my '86 from the factory, 16x7 in the front and 16x8 in the rear. I contacted wheel enhancement and they informed me that they could paint the wheels in any colour i wanted, also fully polish them (not just the lips) as well.
I am running the stock 951 Fuchs on my '86 from the factory, 16x7 in the front and 16x8 in the rear. I contacted wheel enhancement and they informed me that they could paint the wheels in any colour i wanted, also fully polish them (not just the lips) as well.
#18
Hosrom - Shaheed didn't say he was looking at 17 inch Fuchs - 17 inch wheels, not Fuchs.
17 inch Fuchs were never made.
However, you can get them from HRE - they will make you some using original center.
17 inch Fuchs were never made.
However, you can get them from HRE - they will make you some using original center.
#19
Race Director
Originally Posted by special tool
Hosrom - Shaheed didn't say he was looking at 17 inch Fuchs - 17 inch wheels, not Fuchs.
17 inch Fuchs were never made.
However, you can get them from HRE - they will make you some using original center.
17 inch Fuchs were never made.
However, you can get them from HRE - they will make you some using original center.
Obligatory photos of 930 16X9 fuchs on my car:
#20
Shaheed, you could still just sell me your fuchs and take my C2 turbo knockoffs to use until you find what you want. Also there is a beautiful set of forgelines in the classifieds for $1600 that will fit '86.
#24
Race Director
Originally Posted by WesM951
Tifo, Will the 16x9 930's fit over-top the Turbo Brakes?
So I looked forever for these and bought them back in december or January.
#25
Three Wheelin'
Thread Starter
Join Date: Sep 2002
Location: GA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
you can paint the fuchs, but you have to strip the anodizing properly or else the paint won't last. rob maybe we can still do that trade, as i told you before i like your wheels, just wish they weren't so heavy.
#28
UAE Rennlist Ambassador
Rennlist Member
Rennlist Member
Tool: Got it, my mistake!!
What is the proper method of stripping the anodizing properly ? my fuchs are going to get painted in the next coming months, would be nice to know what to look out for.
What is the proper method of stripping the anodizing properly ? my fuchs are going to get painted in the next coming months, would be nice to know what to look out for.
#29
Three Wheelin'
Thread Starter
Join Date: Sep 2002
Location: GA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Rip It
one day u will grow up and appreciate the beauty in fuchs, u will want them, and they will all be taken.
#30
Three Wheelin'
Thread Starter
Join Date: Sep 2002
Location: GA
Posts: 1,286
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by hosrom_951
Tool: Got it, my mistake!!
What is the proper method of stripping the anodizing properly ? my fuchs are going to get painted in the next coming months, would be nice to know what to look out for.
What is the proper method of stripping the anodizing properly ? my fuchs are going to get painted in the next coming months, would be nice to know what to look out for.