Alignment/Ride Height Question (cross-post)
#1
Racer
Thread Starter
Join Date: Mar 2002
Location: Colorado
Posts: 312
Likes: 0
Received 0 Likes
on
0 Posts
Alignment/Ride Height Question (cross-post)
I recently raised the ride height of my car about 1/2" front and rear to clear some taller tires. I know that this made the front/rear camber less negative, and I believe it had no effect on the front caster or toe, but am unsure about the rear toe. Any idea what impact the increased height had on the rear toe?
I just bought a toe bar, and I'm getting close to 0 toe front and rear, which is fine if I'm using the tool accurately. My camber gauge indicates only -.5 deg camber in the rear, and I'd like more. I do have the special tool for adjusting the rear toe, but have never attempted to align the rear. What would be the proper procedure?
Thanks,
Gary
'89 951
I just bought a toe bar, and I'm getting close to 0 toe front and rear, which is fine if I'm using the tool accurately. My camber gauge indicates only -.5 deg camber in the rear, and I'd like more. I do have the special tool for adjusting the rear toe, but have never attempted to align the rear. What would be the proper procedure?
Thanks,
Gary
'89 951