Need a few hose sizes....
03-28-2005, 04:41 PM
#1
Drifting
Thread Starter
Join Date: Jun 2001
Location: The old country
Posts: 2,605
Likes: 0
Received 0 Likes
on
0 Posts
Need a few hose sizes....
.... If someone has their engine apart!.
I'm looking at putting together a nice set of Samco coolant/turbo/vacuum hoses, and rather than taking my engine apart to put it back together to take it apart again (you get the picture....)
Sizes needed:
Vacuum hoses (to ISV and brake booster) on intake
radiator top hose (both sides)
cylinder head outlet (90deg elbow)
Oil filler/breather (on plastic oil filler tank)
Throttle body (Mine are an absolute git to get off!)
Intercooler (Mine are an absolute git to get off!)
TIA
I'm looking at putting together a nice set of Samco coolant/turbo/vacuum hoses, and rather than taking my engine apart to put it back together to take it apart again (you get the picture....)
Sizes needed:
Vacuum hoses (to ISV and brake booster) on intake
radiator top hose (both sides)
cylinder head outlet (90deg elbow)
Oil filler/breather (on plastic oil filler tank)
Throttle body (Mine are an absolute git to get off!)
Intercooler (Mine are an absolute git to get off!)
TIA
03-28-2005, 09:02 PM
#2
Addict
Rennlist Member
Rennlist
Site Sponsor
Rennlist Member
Rennlist
Site Sponsor
ISV and brake booster lines are 1/2" Oil filler is 3/4" I want to say the cylinder head outlet is also 1/2" (on the back of the head), but someone might want to double check me on that one.
