Fitting rear seat belts
#1
Instructor
Thread Starter
Join Date: Oct 2004
Location: Oxfordshire, UK
Posts: 240
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi, i want to fit rear seat belys to my '87 turbo.
I know this involves welding in some fabricated brackets to hold the tentioners.
I can see this part on EPC if you look up a 968.
Does anyone have a late model 944 or 968 with rear belts that can post a picture of the brackets on both sides so i can see better what they look like, and exactly where they are welded to the body.
Thanks.
p.s. just in case im not clear, i want to install 3 point belts, i currently have lap belts. I need to know where the mounting point is in the boot/trunk.
I know this involves welding in some fabricated brackets to hold the tentioners.
I can see this part on EPC if you look up a 968.
Does anyone have a late model 944 or 968 with rear belts that can post a picture of the brackets on both sides so i can see better what they look like, and exactly where they are welded to the body.
Thanks.
p.s. just in case im not clear, i want to install 3 point belts, i currently have lap belts. I need to know where the mounting point is in the boot/trunk.
Last edited by ross255; 02-18-2005 at 04:15 PM.