Couple of easy Q's for the engine builders...
02-07-2005 | 10:47 PM
#16
Thread Starter
Pro
Joined: Apr 2003
Posts: 641
Likes: 0
From: Bethesda, MD
Originally Posted by APKhaos
Don,
Just for reference, we have discovered a local machine shop with a Sunnen machine, the correct pads and silicone pastes, and the know how to use them all. We acually have a resource right here in Falls Church for honing and reboring Alusil blocks. A real find!
More details here
Just for reference, we have discovered a local machine shop with a Sunnen machine, the correct pads and silicone pastes, and the know how to use them all. We acually have a resource right here in Falls Church for honing and reboring Alusil blocks. A real find!
More details here
Actually heard about these guys earlier today! (Had lunch with John). Good to have it triangulated. I also have a line on a Rennlister who has and will rent the pads and paste if all one needs is to freshen up the cross-hatching to seat new rings (where I think I'm headed).
Keeping 'em crossed for you to make VIR...
Don
02-07-2005 | 11:55 PM
#17
Drifting
Joined: Oct 2002
Posts: 2,579
Likes: 1
From: McLean, VA
Originally Posted by DAR951
Keeping 'em crossed for you to make VIR...
Don
