Times up! 3L engine must go.
10-03-2004, 01:44 PM
#1
Burning Brakes
Thread Starter
Join Date: Oct 2003
Location: Taiwan/Singapore
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
Times up! 3L engine must go.
Its about time now to convert and sell off my 951 in factory stock condition, hence the following is for sale as a package:
1. Motor: Complete 3L 8V Turbo Motor (4K mileadge) rebuilt from 968 block with matching Turbo, Intercooler, MAF, Chips, Piggy back + Fuel Map, Hard Pipes, Pauter Rods, Racewares, Honed Intake, 72lbs inj, Oringed head, new valves, valve springs, lifters, spec flywheel and stage 3 clutch, new clutch pump, water pump, oil pump, ISV, new vaccum line, silicon hose ...everything. Car dynoed 2mths ago 340rwhp @12psi, Comp test #s 135, 138, 135,135. Approx CR is 9:1, able to run up to 18psi safely.
2. Suspension and Brakes: Big Reds + Xdrilled Disc for 86' with adapters, rare M030 dual adjustables struts and springs (rebuilt 1K ago using inserts) and strut mounts + 968 M030 front and rear sway bars + bushings.
3. Free = 968 mirrors + door panels + door handle all in black.
I would like to sell as package, will ship from Taiwan. Having shipped used parts many times to US,Australia and UK, I believe some of you guys on the board should be able to confirm that. Anyway, once the price is right, I will put everyting on ebay.
For more details and offers, please email wee8ndrew@hotmail.com
Tks!
1. Motor: Complete 3L 8V Turbo Motor (4K mileadge) rebuilt from 968 block with matching Turbo, Intercooler, MAF, Chips, Piggy back + Fuel Map, Hard Pipes, Pauter Rods, Racewares, Honed Intake, 72lbs inj, Oringed head, new valves, valve springs, lifters, spec flywheel and stage 3 clutch, new clutch pump, water pump, oil pump, ISV, new vaccum line, silicon hose ...everything. Car dynoed 2mths ago 340rwhp @12psi, Comp test #s 135, 138, 135,135. Approx CR is 9:1, able to run up to 18psi safely.
2. Suspension and Brakes: Big Reds + Xdrilled Disc for 86' with adapters, rare M030 dual adjustables struts and springs (rebuilt 1K ago using inserts) and strut mounts + 968 M030 front and rear sway bars + bushings.
3. Free = 968 mirrors + door panels + door handle all in black.
I would like to sell as package, will ship from Taiwan. Having shipped used parts many times to US,Australia and UK, I believe some of you guys on the board should be able to confirm that. Anyway, once the price is right, I will put everyting on ebay.
For more details and offers, please email wee8ndrew@hotmail.com
Tks!
10-03-2004, 01:55 PM
#3
Burning Brakes
Thread Starter
Join Date: Oct 2003
Location: Taiwan/Singapore
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
I have never run more than 14psi before, therefore I can't really tell you the numbers at higher boost level. The motor was built a couple months back, I can say that is has just been broken-in.
Yes, its hell fast and full boost hits by 3K rpm.
Yes, its hell fast and full boost hits by 3K rpm.
10-03-2004, 02:28 PM
#5
Three Wheelin'
Originally Posted by Sam Lin
Sorry to hear you're taking it back apart Andrew. Sam
Trending Topics
10-03-2004, 11:05 PM
#10
Burning Brakes
Thread Starter
Join Date: Oct 2003
Location: Taiwan/Singapore
Posts: 818
Likes: 0
Received 0 Likes
on
0 Posts
I have no choice but to take it apart. I am leaving the country and no one appreciates the 951.
As for the price, I am open to any offer for the week.
#1 #2 #3 goes together.
As for the price, I am open to any offer for the week.
#1 #2 #3 goes together.
10-04-2004, 01:16 AM
#14
Nordschleife Master
Join Date: Aug 2003
Location: Los Angeles
Posts: 9,558
Likes: 0
Received 0 Likes
on
0 Posts
you wont sell the mirrors for cheap to me? I'll buy them... if that encourages you to sell seperatly! and the handles, ahh hell, the panles too! I'll PM you.
~Eyal
~Eyal
