ATTENTION!!! -Zeitronix Group Buy Part Deux -2x the fun!
#46
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The capacitors in the 90-94 DSMs tend to leak all over the board in the ecu and eventually burning holes in the board... The kit they sell replaces the common capacitors that leak... If you pull apart an ECU and sniff the board it will smell like dead fish, or as some say... Dirty P****... Or you can see a film actually accross the board, kind of a light yellowish film.. I havn't heard this being a problem in a porsche...
#47
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
HoBoJoe
Thanks for the heads up ...
Ya killing me with that Dirty p**** line
regards
Ed
Thanks for the heads up ...
Ya killing me with that Dirty p**** line
regards
Ed
#52
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Thanks Guys for all your kind words .....
Glad it all worked out ..
For a while there I thought we were pissing in a fan .....
Hi Five ...
Now all I have to do is install it along with about 20 other things
Not the least of which is my Stage II Viteese set up ....
regards
Ed
Glad it all worked out ..
For a while there I thought we were pissing in a fan .....
Hi Five ...
Now all I have to do is install it along with about 20 other things
Not the least of which is my Stage II Viteese set up ....
![jumper](https://rennlist.com/forums/graemlins/jumper.gif)
regards
Ed
#53
Burning Brakes
Join Date: Jul 2004
Location: Kent, UK
Posts: 1,096
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by Crazy Eddie
Thanks Guys for all your kind words .....
Glad it all worked out ..
For a while there I thought we were pissing in a fan .....
Hi Five ...
Now all I have to do is install it along with about 20 other things
Not the least of which is my Stage II Viteese set up ....
regards
Ed
Glad it all worked out ..
For a while there I thought we were pissing in a fan .....
Hi Five ...
Now all I have to do is install it along with about 20 other things
Not the least of which is my Stage II Viteese set up ....
![jumper](https://rennlist.com/forums/graemlins/jumper.gif)
regards
Ed
![bigbye](https://rennlist.com/forums/graemlins/xyxwave.gif)
#56
Addict
Rennlist Member
Rennlist Member
Join Date: Nov 2002
Location: right next to the right one
Posts: 2,486
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Can I use the Zeitronix instead of taking the car to the Dyno? It's so hard to find the time to get my car on the Dyno. I'm sick of calling all round Norway trying to find a shop that has the time when I have the time. I need to get an a/f plot for a possible chip-reburn.
#57
Race Director
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Yes, with a laptop it will log rpm, throttle, and air/fuel. then you can drop it into excel and make a graph of rpm vs. air/fuel just like what a dyno would show you.
#60
Addict
Rennlist Member
Rennlist Member
Join Date: Nov 2002
Location: right next to the right one
Posts: 2,486
Likes: 0
Received 1 Like
on
1 Post
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Originally Posted by SamGrant951
Yes, with a laptop it will log rpm, throttle, and air/fuel. then you can drop it into excel and make a graph of rpm vs. air/fuel just like what a dyno would show you.
Thanks Sam (I miss your old avatar).
How does the unit register rpm and throttle?
I'm close to ordering.
Also, where do I put the bung for the sensor? (I know this probably has been asked umpteen times before).