Parting feast part 2....86' 951
08-18-2004, 09:24 PM
#31
Drifting
Thread Starter
Join Date: Jun 2001
Location: Yakima,WA / Kaohsiung,TW
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Gator_86_951
Driver side control arm? Just got the FEBI suprise like 5 minutes ago :-(. The FEBI unit is tight, but I am not very comfortable with it having been machined.
How about $60 if the ball joint is good, or $20 if not?
08-18-2004, 09:24 PM
#32
Drifting
Thread Starter
Join Date: Jun 2001
Location: Yakima,WA / Kaohsiung,TW
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
**************Everyone who has ordered parts from me************
I'm all caught up removing and shipping all your parts, everyone should be taken care of. So now I'm ready for more!!
I still have lots of stuff left, some examples:
Weltmiester chips klr/dme
Autothority chips klr/dme
Lindsey boost enhancer
Complete black (not faded) carpet set
Complete black interior panels (a-arms, doors, b-pilar, roof pieces)
Black dash, a few cracks but good
rear lights
working hatch release motor/mechanics/latches
torque tube
torsion bar and setup
front calipers
front and rear hubs/spindles
front and rear rotors (almost new)
rear hatch (needs re-sealing)
doors, handles, locks
side windows (all)
black rear seat (complete)
all seatbelts
gauge cluster
set of (4) 7x16" wheels w/ tires
headlight covers
(2) catback stock mufflers
(3) stock cats
(2) rear wiper motors (both styles)
control arms
stock sway bars front 26 rear 18
pass fender
slightly damaged hood
slightly damaged drivers fender
possibly DME/KLR & wiring harness
I need to get this car stripped and hauled away to make room for the next one
so if anyone local wants to come and work for parts, let me know.
THANKS!!!!!!
Jason
I'm all caught up removing and shipping all your parts, everyone should be taken care of. So now I'm ready for more!!
I still have lots of stuff left, some examples:
Weltmiester chips klr/dme
Autothority chips klr/dme
Lindsey boost enhancer
Complete black (not faded) carpet set
Complete black interior panels (a-arms, doors, b-pilar, roof pieces)
Black dash, a few cracks but good
rear lights
working hatch release motor/mechanics/latches
torque tube
torsion bar and setup
front calipers
front and rear hubs/spindles
front and rear rotors (almost new)
rear hatch (needs re-sealing)
doors, handles, locks
side windows (all)
black rear seat (complete)
all seatbelts
gauge cluster
set of (4) 7x16" wheels w/ tires
headlight covers
(2) catback stock mufflers
(3) stock cats
(2) rear wiper motors (both styles)
control arms
stock sway bars front 26 rear 18
pass fender
slightly damaged hood
slightly damaged drivers fender
possibly DME/KLR & wiring harness
I need to get this car stripped and hauled away to make room for the next one
so if anyone local wants to come and work for parts, let me know.THANKS!!!!!!
Jason
Last edited by Jason_86_951; 08-18-2004 at 11:12 PM.
08-19-2004, 03:23 PM
#34
Drifting
Thread Starter
Join Date: Jun 2001
Location: Yakima,WA / Kaohsiung,TW
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by ian kam
let me know about dme and klr wire harness if it comes up.
Thanks,
Jason
08-20-2004, 10:20 PM
#37
Three Wheelin'
Join Date: Sep 2003
Location: seattle
Posts: 1,692
Likes: 0
Received 0 Likes
on
0 Posts
hey Jason -
How's it going?
Did I tell you that my shifter broke on the way home?
I was trying to shift gears and it refused to go out of 5th.
Then it the shifter was wiggling around like it was totally detatched.
Well it was.
While driving I removed the boot and found that the shifter slipped out and was missing the horse-shoe clip that keeps it in place.
Oh well!
How's it going?
Did I tell you that my shifter broke on the way home?
I was trying to shift gears and it refused to go out of 5th.
Then it the shifter was wiggling around like it was totally detatched.
Well it was.
While driving I removed the boot and found that the shifter slipped out and was missing the horse-shoe clip that keeps it in place.
Oh well!
08-20-2004, 10:38 PM
#38
Drifting
Thread Starter
Join Date: Jun 2001
Location: Yakima,WA / Kaohsiung,TW
Posts: 2,513
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by emwporsche
hey Jason -
How's it going?
Did I tell you that my shifter broke on the way home?
I was trying to shift gears and it refused to go out of 5th.
Then it the shifter was wiggling around like it was totally detatched.
Well it was.
While driving I removed the boot and found that the shifter slipped out and was missing the horse-shoe clip that keeps it in place.
Oh well!
How's it going?
Did I tell you that my shifter broke on the way home?
I was trying to shift gears and it refused to go out of 5th.
Then it the shifter was wiggling around like it was totally detatched.
Well it was.
While driving I removed the boot and found that the shifter slipped out and was missing the horse-shoe clip that keeps it in place.
Oh well!
Did you make it home with the windshield intact?
08-21-2004, 05:51 AM
#39
Three Wheelin'
Join Date: Sep 2003
Location: seattle
Posts: 1,692
Likes: 0
Received 0 Likes
on
0 Posts
I think so but I have not taken it out yet and totally looked at it.
I'm scared to!
the shifter wasn't a big deal at all, coming home today and finding a huge dent from a door smashing into it was.
must find people.
must kill their dog.
I'm scared to!
the shifter wasn't a big deal at all, coming home today and finding a huge dent from a door smashing into it was.
must find people.
must kill their dog.
08-23-2004, 07:38 PM
#44
Instructor
Join Date: Mar 2002
Location: Federal Way, WA
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
I can vouch for the condition of Jason's parts. This car was in shockingly good condition; a real shame that it was wrecked. The interior bits are especially pristeen as this car was loved by the PO.
