White smoke from intake with Dme jumper installed

Reply Subscribe

Thread Tools

Search this Thread

06-10-2022, 07:09 PM

944..JUT

AutoX

Thread Starter

Join Date: May 2022

Posts: 11

Likes: 1

Received 0 Likes on 0 Posts

White smoke from intake with Dme jumper installed

Well it’s that simple it will start an run great with starter fluid but it’s like the dme is turning the car off not sure

Reply Like

06-13-2022, 12:50 AM

Spdygon

Intermediate

Join Date: May 2022

Posts: 27

Likes: 12

Received 4 Likes on 3 Posts

If car starts with starter fluid then you don’t have any gas passing through the injectors .
Do you have fuel pressure ?

Reply Like

The following users liked this post:

944..JUT (06-13-2022)

06-13-2022, 01:49 AM

944..JUT

AutoX

Thread Starter

Join Date: May 2022

Posts: 11

Likes: 1

Received 0 Likes on 0 Posts

Well this might be obvious but I was just spitballing and straight wired the Enging temp sensor and it cranked on it’s on ran pretty choppy but first crank since I bought it 10 months ago🙌🙌🙌🙌checking resistance tomorrow anything else I should look for?

Last edited by 944..JUT; 06-13-2022 at 01:51 AM.

Reply Like