NZ951

Hey,

I have the ISV and venturi system gone burgers. I need the part number of the updated hose that runs from the intake manifold port, under the manifold and then to the brake booster. Anyone? I have searched but are moderately confused by all the different perspectives.

Andrew

cpt_koolbeenz

NZ All you need to do is shorten the existing one about 6 inches...
I will find the PN if you want though...

NZ951

It just wont flex under. I think I need a formed hose, cant be bothered making one.

NZ951

Sorry, so yes a PN would be great, the PET did not seem to show it well enough for me to feel comfortable I was ordering the right part.

cpt_koolbeenz

Hmmm....
I think it is a 951.110.223.01 but don't hold me to it.

cpt_koolbeenz

Can anyone else confirm?

NZ951

That hose does run under the intake correct? then to the BB... I have done a maori job and routed the old hose around the intake and its messy.

NZ951

Bumpy.

pk951

Try my swiss he sells those hose's, thats where i got mine.

PorscheDoc

dude, you just need some 1/2" flexible hose. it runs from the 2/3rd intake runners, under the 4 intake runner and to the T on the firewall, then to the brake booster.

Mike951

Is this what your looking for?

http://www.lindseyracing.com/Merchan...KEMANIFOLDMISC

EDIT: OOps, I thought the part numbers were listed on that page, I thought I saw them there a couple weeks ago. Well there's a picture at least.

Mike

Steve Lavigne

Look in the master cylinder section of PET for the part number.

NZ951

So was that the right number Chris gave?

NZ951

My Swiss has not replied to my messages, who else can supply me one of these hoses? Or confirm the Porsche part number? The number Chris gave me does not apear in the PET

NZ951

Bump