What exhaust should I fit on my 944 turbo!!!!
#16
Rennlist Member
LR has a ton of options including Fabspeed, worth taking a look. https://www.lindseyracing.com/LR/Parts/951EXHAUST.html
I have had one of their mild steel systems on my car for over 12 years, no issues.
I have had one of their mild steel systems on my car for over 12 years, no issues.
#17
Rennlist Member
87944turbo, did you have any issues with the wastegate tie in on the LR exhaust? I have their 3" system (thermal coated) for ~ 12 years and has held up well, but I've never been able to fully prevent the tie-in from leaking. I currently have a band clamp, but the way it is pinched, it leaves a tiny gap. I haven't the Fabspeed in person, but looks very nice and factory fit, but $$$.
#18
Fabspeed is a very nice looking system.
I have the LR 5 inch and LR 3 inch and sold my LR 4 inch.
All LR exhaust has worked. Mine are dump to atmosphere. Thermal coated and in fantastic condition.
Just as a side note I have posted this advice before, regarding installing the LR exhaust, that it must be done properly. Attach all components before tightening the hardware...setting everything in place then tighten things up and it will fit together nicely.
I have the LR 5 inch and LR 3 inch and sold my LR 4 inch.
All LR exhaust has worked. Mine are dump to atmosphere. Thermal coated and in fantastic condition.
Just as a side note I have posted this advice before, regarding installing the LR exhaust, that it must be done properly. Attach all components before tightening the hardware...setting everything in place then tighten things up and it will fit together nicely.
Last edited by gruhsy; 05-22-2020 at 07:24 PM.
#19
Racer
Fabspeed is a very nice looking system.
I have the LR 5 inch and LR 3 inch and sold my LR 4 inch.
All LR exhaust is very nice. Mine are dump to atmosphere. Thermal coated and in fantastic condition.
Just as a side note I have posted this advice before, regarding installing the LR exhaust, that it must be done properly. Attach all components before tightening the hardware...setting everything in place then tighten things up and it will fit together nicely.
I have the LR 5 inch and LR 3 inch and sold my LR 4 inch.
All LR exhaust is very nice. Mine are dump to atmosphere. Thermal coated and in fantastic condition.
Just as a side note I have posted this advice before, regarding installing the LR exhaust, that it must be done properly. Attach all components before tightening the hardware...setting everything in place then tighten things up and it will fit together nicely.
#21
#22
Fabspeed. I did a short review here:
https://rennlist.com/forums/944-turb...st-review.html
Very happy with it.
https://rennlist.com/forums/944-turb...st-review.html
Very happy with it.
#23
Burning Brakes
Fabspeed. I did a short review here:
https://rennlist.com/forums/944-turb...st-review.html
Very happy with it.
https://rennlist.com/forums/944-turb...st-review.html
Very happy with it.
Mike G.