Sooty exhaust in open loop...
02-26-2004, 06:18 PM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jun 2001
Location: Long Island, NY
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Sooty exhaust in open loop...
Ok here's the setup:
1988 Non-S Turbo
Danno 9.x chips & waste gate shims
3.0 bar FPR to go with the danno chips
New TPS
Car has a very sooty exhaust on startup until it warms up. If I accelerate when cold I can see black smoke & the rear panel & license plate are covered in soot.
Once it warms up (closed loop) it doesn't appear bad...
Vacuum connections appear OK (though does idle at about 1100 rpm)
Any idea what I should be checking? I'm obviously running way rich at start up!
TIA
1988 Non-S Turbo
Danno 9.x chips & waste gate shims
3.0 bar FPR to go with the danno chips
New TPS
Car has a very sooty exhaust on startup until it warms up. If I accelerate when cold I can see black smoke & the rear panel & license plate are covered in soot.
Once it warms up (closed loop) it doesn't appear bad...
Vacuum connections appear OK (though does idle at about 1100 rpm)
Any idea what I should be checking? I'm obviously running way rich at start up!
TIA
