Identify this nose and lip?
#1
Three Wheelin'
Thread Starter
Identify this nose and lip?
In process of purchasing a 1986 Turbo.
Anyone identify the nose with the horizontal hole just below Porsche crest and the lip?
Anyone identify the nose with the horizontal hole just below Porsche crest and the lip?
#5
Rennlist Member
No, not really like the 924 panel. Just aftermarket.
Trending Topics
#8
Nordschleife Master
#9
Thanks for the correction. Always thought that is what the piece was Maybe I read somewhere online 924 style vented nose panel with a pic that looked like that????
#10
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
this is the 931 panel
#12
Drifting
I wouldn’t vent that area ever. If you want the intercooler to cool then don’t install that panel. A LR stage five panel will capture air and not vent it like that one will. Think air pressure difference. If you want to really improve the air flow thru the intercooler place a heat vent on the front of the hood behind the intercooler.
#13
Drifting
#14
Race Car
When using a vented panel, it should be coupled with some self fabricated ducting.
Similar to Grushy's altered steel one.
Some kind of hood vent that allows exit air to flow over the windshield/roof as the factory intended is always a good idea.
T
Similar to Grushy's altered steel one.
Some kind of hood vent that allows exit air to flow over the windshield/roof as the factory intended is always a good idea.
T