WTB: used MAF intake pipe
#1
Three Wheelin'
Thread Starter
WTB: used MAF intake pipe
Hi guys,
I want to start experimenting with different intake/filter setups on my VEMS-equipped 951, so I would like to find some sort of aftermarket intake pipe (with or without cone filter) that has the same ports as the factory J-boot (I currently have the Lindsey silicone version of the J-boot and factory airbox).
I don't need a MAF sensor or anything else, just some sort of pipe that I can attach a filter and the breather and bypass/blowoff valve to.
Send me a PM if you have anything, or post a pic here.
Thanks in advance!
I want to start experimenting with different intake/filter setups on my VEMS-equipped 951, so I would like to find some sort of aftermarket intake pipe (with or without cone filter) that has the same ports as the factory J-boot (I currently have the Lindsey silicone version of the J-boot and factory airbox).
I don't need a MAF sensor or anything else, just some sort of pipe that I can attach a filter and the breather and bypass/blowoff valve to.
Send me a PM if you have anything, or post a pic here.
Thanks in advance!
#4
Rennlist Member
Chris the pipe you need is easily fabricated from a about $50
Filter pipe
worth of parts and a little TIG welding
Filter pipe
worth of parts and a little TIG welding
Last edited by gpr8er; 10-23-2018 at 11:53 AM. Reason: Pic