When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I think I have a done a bad thing I have a light coating of oil inside my distributor and my resistance is at 692 ohms on my 1980 US A/T. I thought it would be a good time to clean it. I removed and disassembled it. When I was done, I only had one spring for the distributor. It looks like I should have 2, but I must admit I'm not sure it had 2 to begin with. Can anyone confirm the distributor has 2 springs? If so, where could I order a new one? If not, which side should the spring connect to? Thanks in advance! - -
06-25-2017 | 11:38 PM
Distributor missing spring
I have a light coating of oil inside my distributor and my resistance is at 692 ohms on my 1980 US A/T. I thought it would be a good time to clean it. I removed and disassembled it. When I was done, I only had one spring for the distributor. It looks like I should have 2, but I must admit I'm not sure it had 2 to begin with. 
Can anyone confirm the distributor has 2 springs? If so, where could I order a new one? If not, which side should the spring connect to? Thanks in advance!
