Oil Level Sensor Switch Connector Boot
02-21-2017, 03:24 PM
#1
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Thread Starter
Oil Level Sensor Switch Connector Boot
I now have in stock a suitable boot for the connector where it attaches to the oil level sender.
Price is $12 each. I also have the connector for the wire $1 each.
Thanks and credits go to Rob Edwards for the due diligence and pictures.
Thanks to Sean Ratts at 928Docs for trial installation on an actual harness.
Thanks to Kevin in Atlanta for sharing the original link.
Please email me at Roger@928sRus.com
Price is $12 each. I also have the connector for the wire $1 each.
Thanks and credits go to Rob Edwards for the due diligence and pictures.
Thanks to Sean Ratts at 928Docs for trial installation on an actual harness.
Thanks to Kevin in Atlanta for sharing the original link.
Please email me at Roger@928sRus.com
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Last edited by ROG100; 02-21-2017 at 04:17 PM.
02-21-2017, 03:46 PM
#3
Nice Rog. Going forward I"ll be using these so save me a couple dozen.
02-22-2017, 10:28 AM
#5
Nordschleife Master
Well isn't this just great.
Of course, my OPG and Derlin rack bushings arrived last Saturday.
Oh well.
Roger, you have an e-mail from me. I want one.
In all seriousness, this is why I support the "usual suspects" on here when buying parts. Maybe I could have found the stuff I needed for a bit less.
But would those discount vendors go through the effort to find these kinds of (formerly) NLA bits and pieces?
Of course, my OPG and Derlin rack bushings arrived last Saturday.
Oh well.
Roger, you have an e-mail from me. I want one.
In all seriousness, this is why I support the "usual suspects" on here when buying parts. Maybe I could have found the stuff I needed for a bit less.
But would those discount vendors go through the effort to find these kinds of (formerly) NLA bits and pieces?