drscottsmith

Can someone verify or post a pic of the way the vertical grill supports, bottom lip of bumper, and chin spoiler fit together? It appears that there is a hole in each and they should line up in some way with a bolt going through all three.

I cannot tell the order of the "sandwich" as these are bolted in. The grill and chin spoiler were torn off of my car when I got it.

Thanks -

-scott

95carrera

Go to Porsche website and download PDF parts file for your car, you will see diagram of parts with part # to show you what goes where.

77tony

....

Vandalizer

This is great as I've been trying to find this myself. I have a parts car with this complete on it but the bolts are frozen and the heads may be stripped. I didn't realize it was as inexpensive (comparatively speaking) as it is.

95carrera

This is handy pdf to have when looking for part #'s and how things go together.

http://www.porsche.com/all/media/pdf...86_KATALOG.pdf

Ad0911

I just noticed that support #3 is available as a new part but the center piece #4 is not available? Are they much different? The curvature different? Holes don't line up? Or can I just use #3 in the centre too?

James Bailey

much different in length...

drscottsmith

You'll need two of the outside supports and the one for the inside. The brackets do not include new screws.

Mounted up fine. I still do not have a clear understanding of the three holes in the chin spoiler and their attachment points. In the WSM and parts guide, the grill and spoiler are on different pages and there is no good pic to see how they all fit.

-scott