scottpeterd

On my 1979, where the windshield washer tubing passed through the plastic grommet into the hood, there are two small white plastic right angle fittings.

Both of mine are broken. Anyone know where I can find them?

Cheers

Mrmerlin

Roger@928sRus.com has new washer connector caps they allow the old harness to pass through the cap

ROG100

Yes we stock them all - single, double and blank - Thanks Mr Merlin

scottpeterd

Roger,

My cap in intact. It's the elbows themselves that are broken.

Or do your caps come with the elbows?

Cheers

ROG100

The caps come with the elbows to allow the washer fluid to flow through the cap and the tubing attaches both sides.

Mrmerlin

Your welcome Roger,
a picture finishes it off,
new caps look like this.
the other side has the outlets going in the opposite direction as the inlet.
The open slot is for the wire harness connector to pass through

Randy V

Any PepBoyz or AutoZone will have something in stock that will work.

Guaronteeed.

scottpeterd

Roger,

Can you give me a link to this on your site? Searching is not coming up with anything.

Cheers

Mrmerlin

here is the link Roger@928sRus.com

Wisconsin Joe

Roger's website is a bit...

Sparse.
He stocks a lot of stuff. Cataloging it all is a daunting task.

The best way to deal with him is to either send an e-mail explaining what you want, or to call.

If you e-mail, keep in mind that Roger knows these cars well enough that you can ask for the "tube elbow thingy that goes into the hood" and he will know exactly what you mean. If he doesn't, he will reply to make sure.

If you choose to call, you can expect a very pleasant conversation with a fellow 928 enthusiast. Even if he does talk funny.