Broken Bolt Nightmare
#77
Three Wheelin'
Join Date: Nov 2003
Location: Los Angeles, CA
Posts: 1,577
Likes: 0
Received 0 Likes
on
0 Posts
@Steve_C
That's EXACTLY what I did. I tried taking a caliper apart, and this ONE bolt would not budge. Then, it got all buggered up. I ended up trying to drill through it, but then started drilling out the side and going into the caliper - so I stopped. I then took a dremel to the head (which luckilly was still intact), cutting a large slot, putting a piece of steel in the slot, and smashing it with a hammer.
yup, that got it out.
That's EXACTLY what I did. I tried taking a caliper apart, and this ONE bolt would not budge. Then, it got all buggered up. I ended up trying to drill through it, but then started drilling out the side and going into the caliper - so I stopped. I then took a dremel to the head (which luckilly was still intact), cutting a large slot, putting a piece of steel in the slot, and smashing it with a hammer.
yup, that got it out.