Hello 1978 in Continental Orange
#61
Rennlist Member
Huh.
Take a look at the shot of the car on the lift. Notice how the 911's rear line precisely matches the 928's?
Photographic proof of what I've been saying for a while: The 928 didn't die and it will never return. Porsche has been quietly but steadily morphing the 911 into an ***-ended version of the 928. They retired the 928 because they didn't want the purists to notice how similar they're getting and they didn't want to embarrass what's left of the management team that kept the 911 in the first place.
Take a look at the shot of the car on the lift. Notice how the 911's rear line precisely matches the 928's?
Photographic proof of what I've been saying for a while: The 928 didn't die and it will never return. Porsche has been quietly but steadily morphing the 911 into an ***-ended version of the 928. They retired the 928 because they didn't want the purists to notice how similar they're getting and they didn't want to embarrass what's left of the management team that kept the 911 in the first place.
#63
Huh.
Take a look at the shot of the car on the lift. Notice how the 911's rear line precisely matches the 928's?
Photographic proof of what I've been saying for a while: The 928 didn't die and it will never return. Porsche has been quietly but steadily morphing the 911 into an ***-ended version of the 928. They retired the 928 because they didn't want the purists to notice how similar they're getting and they didn't want to embarrass what's left of the management team that kept the 911 in the first place.
Take a look at the shot of the car on the lift. Notice how the 911's rear line precisely matches the 928's?
Photographic proof of what I've been saying for a while: The 928 didn't die and it will never return. Porsche has been quietly but steadily morphing the 911 into an ***-ended version of the 928. They retired the 928 because they didn't want the purists to notice how similar they're getting and they didn't want to embarrass what's left of the management team that kept the 911 in the first place.
#65
Advanced
Thread Starter
#66
Burning Brakes
Just don't change air filter direction now. All the crap trapped in filter will now be blown into motor. Either change filter now or wait until a change is required down the road. Just an FYI...car is beautiful and has motivated me to get moving on my CO car, now at the mechanic getting all systems refurbed...
Really beautiful job you did there...
Really beautiful job you did there...
#69
Advanced
Thread Starter
OK! Next up is exhaust and suspension!
I was going to keep her super stock but I've decided to go for Gaz coilovers and a 3 inch exhaust with Magnaflow muffler and MSDS headers.
I was going to keep her super stock but I've decided to go for Gaz coilovers and a 3 inch exhaust with Magnaflow muffler and MSDS headers.
#72
Burning Brakes
I used to occasionally see a continental orange 928 parked on the street here in Santa Rosa, CA. So, there's one more for the club.
Don't know who owned it or what happened to it. Haven't seen it for probably 15 years.
Don't know who owned it or what happened to it. Haven't seen it for probably 15 years.
#73
Nordschleife Master
Others may disagree, but I see swapping exhaust and springs as similar to wheels (maybe a bit more involved).
No essential change to the car, and can be easily reversed.
That really is a nice example.
No essential change to the car, and can be easily reversed.
That really is a nice example.
#74
AutoX
Hey Jheis, I've got it. It's already accounted for-#559. It's down in So.Cal. now. I grew up in Santa Rosa, so when I saw an orange 928, on craigslist, in SR, I knew I had to get it!
#75
Rennlist Member
Ruisteves,
Your model might differ, but installing MSDS headers will preclude you from doing any kind of clutch work inside the lower bell housing without loosening or removing at least one of the headers. (My favorite and the easier one to loosen is the right side one, BTW)
The power gains can make MSDS worth it, but you should at least know the downside.
Great looking car, BTW!
Your model might differ, but installing MSDS headers will preclude you from doing any kind of clutch work inside the lower bell housing without loosening or removing at least one of the headers. (My favorite and the easier one to loosen is the right side one, BTW)
The power gains can make MSDS worth it, but you should at least know the downside.
Great looking car, BTW!