Ezk chip cover
#2
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
So ipif anyone has an issue like this .....
There are two slots on the topof the sides of the cover.
You will need to insert a very thin flat blade screwdriver and tilt the screwdriver to spread out the bottom of the cover.
This will release the locking tab at the bottom.....
Chips are both in.........
Going back in car and then o2sensor and timing.....
There are two slots on the topof the sides of the cover.
You will need to insert a very thin flat blade screwdriver and tilt the screwdriver to spread out the bottom of the cover.
This will release the locking tab at the bottom.....
Chips are both in.........
Going back in car and then o2sensor and timing.....