Best options for shops that test/rebuild KJet WURs and FDs ?
#1
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi ! 1981 928s euro CIS 5spd lsd
I hope everybody is having a super weekend.![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Quick question, please;
what are the best current options for shops that test/rebuild CIS KJet components?
For instance, my fuel distributor and warm up regulator... is it best to just send in a core and get a rebuilt unit?![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
Any experiences you might care to share?
I don't have anything in the way of test gauges, etc, and I am looking for a less owner-intensive-fix for this particular system.
As always, thanks so much for your help and suggestions.
Dan
I hope everybody is having a super weekend.
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Quick question, please;
what are the best current options for shops that test/rebuild CIS KJet components?
For instance, my fuel distributor and warm up regulator... is it best to just send in a core and get a rebuilt unit?
![Confused](https://rennlist.com/forums/images/smilies/confused.gif)
Any experiences you might care to share?
I don't have anything in the way of test gauges, etc, and I am looking for a less owner-intensive-fix for this particular system.
As always, thanks so much for your help and suggestions.
Dan
#2
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Jim might be able to help, has been focusing on the early/CIS niche.
http://www.928classics.com/services.html
Wouldn't be surprised if 928 motorsports and/or 928sRus can help too. I think 928Intl
There are a couple folks rebuilding the FDs on Ebay and there is a Delorean place that works with the components as well and can source some parts/components that are getting scarce.
http://www.928classics.com/services.html
Wouldn't be surprised if 928 motorsports and/or 928sRus can help too. I think 928Intl
There are a couple folks rebuilding the FDs on Ebay and there is a Delorean place that works with the components as well and can source some parts/components that are getting scarce.
#3
Rennlist Member
Join Date: Jan 2015
Location: Near Mushroom Capital of the World
Posts: 3,019
Received 198 Likes
on
125 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Dan and Jim,
Contacted Jim at 928classics.com and just received message today that he will not be rebuilding anymore WUR and FD due to their time consumption.
However, from earlier rennlist search, people from either 928 or 911 forum have recommended a place call: www.CISFlowTech.com.
I received an email response from them a month ago with the following info and pricing:
"FD would be $ 475.00 and WUR $ 275.00 plus shipping. You really need to talK TO LARRY 251-929-3771".
I will be calling them as soon as I receive my '80 euro engine hopefully in the next 1-2 weeks.
Hope this helps
-Hoi
Contacted Jim at 928classics.com and just received message today that he will not be rebuilding anymore WUR and FD due to their time consumption.
However, from earlier rennlist search, people from either 928 or 911 forum have recommended a place call: www.CISFlowTech.com.
I received an email response from them a month ago with the following info and pricing:
"FD would be $ 475.00 and WUR $ 275.00 plus shipping. You really need to talK TO LARRY 251-929-3771".
I will be calling them as soon as I receive my '80 euro engine hopefully in the next 1-2 weeks.
Hope this helps
-Hoi
#4
Race Car
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Delorean place:
http://www.specialtauto.com/porsche-parts/index.html
Edit: I"ve purchased parts here, but have not utilized their services IIRC.
Actually, I did buy a NEW WUR back in the day...a Euro one to boot...and found it was wildly mis-calibrated right out of the box.
Tried to get it into spec, finally did send it somewhere for a professional 'rebuild' calibration. Don't recall whether it was these folks or not...but they have been in business a loong time.
http://www.specialtauto.com/porsche-parts/index.html
Edit: I"ve purchased parts here, but have not utilized their services IIRC.
Actually, I did buy a NEW WUR back in the day...a Euro one to boot...and found it was wildly mis-calibrated right out of the box.
Tried to get it into spec, finally did send it somewhere for a professional 'rebuild' calibration. Don't recall whether it was these folks or not...but they have been in business a loong time.
Last edited by SMTCapeCod; 10-10-2015 at 09:14 PM.
#5
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Has anyone worked with the DeLorean place from our 928 forum?
Thanks so much !
Dan
Thanks so much !
Dan
#6
Instructor
Join Date: May 2015
Location: Uganda, Baltimore, PNW, italy
Posts: 218
Likes: 0
Received 11 Likes
on
9 Posts
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
That's a shame that Jim has decided to stop the rebuilds. He did both my WuR and FD this spring. The results were fantastic. I now have a reliable daily driver.
It's stored for 10 months out the year. I fired it up yesterday. Idled perfectly, and drove like it was never stored.
I can't compliment his work highly enough..
It's stored for 10 months out the year. I fired it up yesterday. Idled perfectly, and drove like it was never stored.
I can't compliment his work highly enough..
#7
Addict
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
CIS Flowtech has taken care of the fuel distributors for both of my 1979 928s, did a great job.
Rich
1993 928 GTS Cover Girl
1987 928 S4 Rennsport IV and V shuttle
1979 928 5-speed rescue
1979 928 Euro 5-liter track beast
Rich
1993 928 GTS Cover Girl
1987 928 S4 Rennsport IV and V shuttle
1979 928 5-speed rescue
1979 928 Euro 5-liter track beast
Trending Topics
#8
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
The former owner of my 80 Euro had substituted a WUR from another Mercedes. After a year or so of trying to figure out my KJet problems, I finally was able to narrow it down to the wrong WUR! Using the WUR curves specific to the 80 Euro from the FWSM, Special T rebuilt my WUR to the Porsche Euro specs. Worked great and the engine ran much better. (BTW, I replicated the curves in an Excel spreadsheet for them and mailed with the WUR)
I think the turnaround was less than two weeks including shipping.
Also, they are good source for K-Jet parts.
I think the turnaround was less than two weeks including shipping.
Also, they are good source for K-Jet parts.
#9
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I now work with John at the Delorean shop local to me and stock the rebuilt WUR's and Distributors. I also sell similar for other CIS cars as well.
__________________
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
![](https://cdn.shopify.com/s/files/1/1694/8685/files/928sRus_rennlist.png?v=1621798567)
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
#11
Rennlist Member
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![popcorn](https://rennlist.com/forums/images/smilies/popcorn.gif)
#12
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi Dan,
What is the pop corn for????
Rebuilt and calibrated WUR $315 plus core charge.
Rebuilt Distributor $595 plus core charge.
Best,
Rogger
What is the pop corn for????
Rebuilt and calibrated WUR $315 plus core charge.
Rebuilt Distributor $595 plus core charge.
Best,
Rogger
#13
Rennlist Member
Thread Starter
![Smile](https://rennlist.com/forums/images/icons/icon7.gif)
Hi Roger !!
I was eagerly waiting to see your response concerning the core charge, etc.
Do you generally prefer to just receive the cores prior to shipping the rebuilt units?
Thanks !!!!!![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Dan
I was eagerly waiting to see your response concerning the core charge, etc.
Do you generally prefer to just receive the cores prior to shipping the rebuilt units?
Thanks !!!!!
![Smilie](https://rennlist.com/forums/images/smilies/smile.gif)
Dan