Temp II sensor for dummies
#18
Addict
Rennlist Member
Rennlist Member
Join Date: Oct 2003
Location: Gone. On the Open Road
Posts: 16,538
Received 1,676 Likes
on
1,087 Posts
First, you will need a new crush ring for the new sensor.
Second, is the water bridge powder-coated?
Second, is the water bridge powder-coated?
#20
Chronic Tool Dropper
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Ask Rob to bring his 'intake leak testing' fixture to Sharktoberfest. In a few minutes you can see if the intake and oil vent plumbing are leaking air. Stooopid stuff like a cracked vent hose allow false air into the engine, or a cracked oil filler, or... Lots of things. Jim's Sharktuner can see what the idle stabilizer is doing, and verify some of the other functions. With all the discussions on different aftermarket chip mixes in your car, you might be the perfect test subject for a Sharktuner/Sharkplotter clinic while the tools and the talent are all gathered in Anaheim next weekend. Very gracious of Jim to offer that!
#21
Rennlist Member
Thread Starter
Join Date: Sep 2010
Location: Fresno, CA (summer in Calgary)
Posts: 1,376
Likes: 0
Received 2 Likes
on
2 Posts
Sadly I'm not going to be able to make it to Sharktoberfest, as per usual. Too much family and work stuff happening as always, and spare cash running low. I'll just have to soldier on here on my own for a while longer.
I do appreciate the offers of assistance. I'll keep checking out things as I can here.
-Sean
I do appreciate the offers of assistance. I'll keep checking out things as I can here.
-Sean