Picked up the project - parts 2 b available
09-10-2003, 05:33 PM
#1
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jan 2003
Location: Mountains of GA!
Posts: 3,537
Likes: 0
Received 0 Likes
on
0 Posts
Picked up the project - parts 2 b available
Well - just got back from the long trailer haul from TX with the project car! Not bad shape - considering that she sat in the hot TX sun for 3 years!
It is a '79 EURO....I will be pulling everything off that isn't necessary - as I build her into a dedicated track car. I bought her as a roller - no engine.
I will be putting a lot of stuff on eBay - but prefer to deal with fellow needy Renn-er's first!
SO - if there are any particular needs that you may have, let me know, and we'll see if we can't make a deal.
The interior is pretty rough...but the Pass seat, headliner, hatch interior surround, pass door liner, consoles and instrument pod are in good enuff shape to easily be cleaned up and refurbed for use. AC control unit looks good. Also there is the AC Compressor and evap. cooler - no clue as to working condition on any of the mechanicals....interior is black.
Rear quarter window trim is intact - ready for sanding and painting - no dents/bends.
PM or email me at cicmark@aol.com if there's anything you are interested in...before it goes to eBay.
It is a '79 EURO....I will be pulling everything off that isn't necessary - as I build her into a dedicated track car. I bought her as a roller - no engine.
I will be putting a lot of stuff on eBay - but prefer to deal with fellow needy Renn-er's first!
SO - if there are any particular needs that you may have, let me know, and we'll see if we can't make a deal.
The interior is pretty rough...but the Pass seat, headliner, hatch interior surround, pass door liner, consoles and instrument pod are in good enuff shape to easily be cleaned up and refurbed for use. AC control unit looks good. Also there is the AC Compressor and evap. cooler - no clue as to working condition on any of the mechanicals....interior is black.
Rear quarter window trim is intact - ready for sanding and painting - no dents/bends.
PM or email me at cicmark@aol.com if there's anything you are interested in...before it goes to eBay.
09-10-2003, 07:54 PM
#5
Pro
Join Date: Aug 2002
Location: Jacksonville, FL
Posts: 603
Likes: 0
Received 0 Likes
on
0 Posts
Hey Mark,
Congrats on the new track car. So, how long you think before she's out on the track? Have you figured out which way you wanna head on the motor?
Good luck with it,
Congrats on the new track car. So, how long you think before she's out on the track? Have you figured out which way you wanna head on the motor?
Good luck with it,
09-10-2003, 08:07 PM
#6
Addict
Rennlist Member
Rennlist Member
Thread Starter
Join Date: Jan 2003
Location: Mountains of GA!
Posts: 3,537
Likes: 0
Received 0 Likes
on
0 Posts
Dave -
My aim is to start 2004 in BM with the track car instead of the current shark in BSP!
I think I have found an 83 motor....I should know more in a couple of weeks.
My aim is to start 2004 in BM with the track car instead of the current shark in BSP!
I think I have found an 83 motor....I should know more in a couple of weeks.
