928 Indicator Lights & Hazard Switch Wire Melted
#16
Team Owner
Glad you fixing these little issues your gonna have a great car once your done.
FWIW to remove the bulbs from the switch housings,
pull the outer **** off.
then take a thin cut piece of 400 grit paper and tweezers ,
make a U out of the paper then fit it over the tip of the bulb,
then use the tweezers to clamp the paper to the bulb then pull
FWIW to remove the bulbs from the switch housings,
pull the outer **** off.
then take a thin cut piece of 400 grit paper and tweezers ,
make a U out of the paper then fit it over the tip of the bulb,
then use the tweezers to clamp the paper to the bulb then pull
#17
Electron Wrangler
Lifetime Rennlist
Member
Lifetime Rennlist
Member
Glad you fixing these little issues your gonna have a great car once your done.
FWIW to remove the bulbs from the switch housings,
pull the outer **** off.
then take a thin cut piece of 400 grit paper and tweezers ,
make a U out of the paper then fit it over the tip of the bulb,
then use the tweezers to clamp the paper to the bulb then pull
FWIW to remove the bulbs from the switch housings,
pull the outer **** off.
then take a thin cut piece of 400 grit paper and tweezers ,
make a U out of the paper then fit it over the tip of the bulb,
then use the tweezers to clamp the paper to the bulb then pull
Alan
#18
Team Owner
Thanks for the tip Alan, thats a great idea!