help my 84 928S won't atart
#1
Pro
Thread Starter
help my 84 928S won't atart
Today I removed the central control board to clean the contacts. I replaced everything correctly but it will crank but no fire. I disconnected the battery first to keep safe. I've checked the board twice and no appearance problems or miswired. The only plug I can't identity is this one. Help any ideas?
#2
Rennlist Member
Could be Z-plug. It controls security system. Plug it back in or make a Z4 to Z6 jumper. You will see very tiny numbers and letters if you look closely. Try to post picture.
Good luck,
Dave
Good luck,
Dave