stuartbrs

Just finishing off the timing belt job when I noticed this broken wire dangling down by the AC compressor.

Any idea`s what it should connect to? The car is a 1981S, RHD, and that pic is obviously on the drivers side.

ammonman

Connection to the AC compressor clutch solenoid.

Mike

stuartbrs

Thankyou Mike. So... where should the broken end attach to?

Tails

+1 to that.

You will need to insure that is does not touch the drive belt and that it is secured out of the way of rotating items.

Tails

There should be some wires coming out of the A/C compressor clutch solenoid, If there are no wire tails from the solenoid then you have some problems.

Mrmerlin

in your first picture the wire attaches to the harness thats coming across the top of the engine it should be a black wire
NOTE the harness is pictured