alternator and powersteering
#61
Instructor
Thread Starter
Join Date: Sep 2012
Location: Philadelphia, PA
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
ok I have the airpump/fan belt in now. how tight to they all need to be?
EDIT: nevermind about the tensions. I checked the WSM and it said about 10mm of give. but please correct me if that is outdated...
EDIT: nevermind about the tensions. I checked the WSM and it said about 10mm of give. but please correct me if that is outdated...
Last edited by timbuktoo; 06-29-2013 at 06:50 PM.
#62
Instructor
Thread Starter
Join Date: Sep 2012
Location: Philadelphia, PA
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
SHE LIVES AGAIN!!. and the headlights seem to be a little bit brighter, although the voltometer hasent gone up or down much.
I also managed to make the engine run smoother by reconecting the vacuum line to the passenger fuel rail pressure release valve
I also managed to make the engine run smoother by reconecting the vacuum line to the passenger fuel rail pressure release valve