16v K-Jet Intake for sale, parting lines removed
#1
Developer
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
If you have been thinking of painting or polishing your 16v intake manifold, I have one here that will save you some time.
The first thing you will want to do is remove the casting lines on each leg of the intake and the center plenum... and this manifold has already had that done.
It was bead blasted after it was finished, and it has a Porsche hood badge placed on the body.
Needs a little cleanup is all and can be installed as-is (satin finish) or ready to paint.
It would save you the time and effort removing those parting lines before your paint or polish project.
Note it holds the K-Jet injectors, not L-Jet. It was from my 1978 928. Will be a direct replacement for any 1978-82 K-Jet 219 and 229 HP motors.
$100 Carl 920-485-0928
The first thing you will want to do is remove the casting lines on each leg of the intake and the center plenum... and this manifold has already had that done.
It was bead blasted after it was finished, and it has a Porsche hood badge placed on the body.
Needs a little cleanup is all and can be installed as-is (satin finish) or ready to paint.
It would save you the time and effort removing those parting lines before your paint or polish project.
Note it holds the K-Jet injectors, not L-Jet. It was from my 1978 928. Will be a direct replacement for any 1978-82 K-Jet 219 and 229 HP motors.
$100 Carl 920-485-0928
#2
Administrator - "Tyson"
Lifetime Rennlist
Member
Lifetime Rennlist
Member