Notices
928 Forum 1978-1995
Sponsored by:
Sponsored by: 928 Specialists

8" H4's P/N 928 631 101 03 aftermarket prod'n

Thread Tools
 
Search this Thread
 
Old 12-30-2012, 03:53 PM
  #1  
Tim968
Instructor
Thread Starter
 
Tim968's Avatar
 
Join Date: Nov 2007
Location: Calgary, AB
Posts: 140
Likes: 0
Received 0 Likes on 0 Posts
Default 8" H4's P/N 928 631 101 03 aftermarket prod'n

Hi All; I had occasion to contact a reseller and ask about 8" H4's, as mine (ex-Japan) are for Left Hand Traffic, and socially-irresponsible here in Canada. They checked with Porsche USA; answer was first "Yes", then "No", then "Yes". So, I ventilated the Visa and ordered them. They are nice pieces, but I have not installed them yet.

Auto Historians among the list probably recall that Bosch and Magneti-Marelli formed a partnership called "Automotive Lighting" a few years ago, in the Czech Republic. http://www.al-lighting.com. Somewhere along the way, (I am guessing, and I have my tinfoil hat on, so caveat/on) Bosch sold some of its NLA/Discontinued parts rights off to Automotive Lighting. Voila, some of these components are apparently being reproduced and are available through distributors who have access to Porsche USA.

When you search http://www.automotive-tradition.com there's a lot of arcane and conflicting information, some of which shows the Left Hand Traffic 8" H4 (Porsche P/N 928 631 102 01 / Bosch 0 301 900 701) and North-Am styled Sealed Beam (Porsche P/N 928 631 135 00 / Bosch 0 302 401 001) both NLA, and no reference to the 8" H4 for Right Hand Traffic. Careful with my P/N details above, they may be incorrect. The photo (below) is the only one you might want to rely on.

Anyway, here are the pictures. I got good pricing and good service (no affiliation) from Sid Gonzalez at Vertex in Miami in this regard.

Last edited by Tim968; 08-22-2015 at 07:02 PM.
Old 12-31-2012, 03:10 AM
  #2  
Fogey1
Rennlist Member
 
Fogey1's Avatar
 
Join Date: Oct 2004
Location: Y-Bridge City, Zanesville, Ohio
Posts: 2,210
Received 6 Likes on 6 Posts
Default

Thanks for the info.

Oddly, Vertex shows two pieces with differing SKU's but the same part number. It's confusing.
http://www.vertexauto.com/listitems.aspx
(I question if this link will work. If not, search by Part Number - 928 631 101 03 - and they'll show up.)

I see ~$350 on the Vertex site. Did you get a better price?
Old 12-31-2012, 12:00 PM
  #3  
Herman K
Rennlist Member
 
Herman K's Avatar
 
Join Date: Jun 2005
Location: Rockport, TX
Posts: 1,697
Received 14 Likes on 8 Posts
Default Price check....

FYI,

Last time I bought mine I got them from Roger at a better price



Quick Reply: 8" H4's P/N 928 631 101 03 aftermarket prod'n



All times are GMT -3. The time now is 07:12 PM.