Ducman82

im trying to plug the M8x1.00 vacuum/bango hole on the front of my Spider intake. im having a hell of a time tracking down a button head or machine head bolt...

with my custom oil cap i need it as flush as possible...

any help would be fantastic...

Jim Devine

If it doesn't have to come back out, something like this installed with a little JB weld might work-

http://www.mcmaster.com/#cadinlnord/99642a130/=klszhz

Ducman82

that should work just fine. thank you!

Jim Devine

make sure you JB weld it & or take a punch to the top thread or 2- these are straight thread (not tapered like a pipe plug)& can go all the way into the manifold = disaster.