anybody know how to wire bosch 5 wire wideband o2?
#1
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
bought my o2 seperate. didn't like gauges most lits came with. have a air/ fuel gauge. but what wires do what on 5 wire 02. colors: red, white, grey, black , yellow.
#2
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Hi tripingeorge,
Have a read here: http://wbo2.com/cable/connkit.htm , with regards to the "Bosch CNK17025 Connector (for LSU 4.9)" chapter and the 17025 mating connector picture on the right side.
Red = Ip
Yellow = Vs/Ip
Black = Vs
Grey = Heater +
White = Heater -
By the way: which 928 and MY do you have, and why the wideband o2 (just for measuring, or SC install or..)?
Have a read here: http://wbo2.com/cable/connkit.htm , with regards to the "Bosch CNK17025 Connector (for LSU 4.9)" chapter and the 17025 mating connector picture on the right side.
Red = Ip
Yellow = Vs/Ip
Black = Vs
Grey = Heater +
White = Heater -
By the way: which 928 and MY do you have, and why the wideband o2 (just for measuring, or SC install or..)?
#3
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
just for meauring. thats the problem. my gauge has one wire for signal input. i understand the heater + and -, but don't know what to do with the other 3. what is Ip, Vs/IP and Vs. how and to what do i connect those to. there is nowhere for those to go on my gauge. so do i connect 12v to those and one is signal?? can't find any info. my gauge has a negative and signal wire input