FS: 86.5 Brakes and full suspension. $600+shipping.
#1
Captain Obvious
Super User
Super User
Thread Starter
FS: 86.5 Brakes and full suspension. $600+shipping. SOLD!
FS: 86.6 Brakes and full suspension. $600+shipping. SOLD!
Front and rear 4 piston callipers
Front left and right spindles,
Left and right, front upper and lower control arms
Full thickness brake pads
I would prefer to sell it as a complete set but if there is enough interest for the individual parts, I will consider splitting it up. $600+shipping. Parts are in Cambridge, Ontario, Canada.
Have the complete front and rear suspension and if any other part is needed, I will include that too at a very reasonable price.
Front and rear 4 piston callipers
Front left and right spindles,
Left and right, front upper and lower control arms
Full thickness brake pads
I would prefer to sell it as a complete set but if there is enough interest for the individual parts, I will consider splitting it up. $600+shipping. Parts are in Cambridge, Ontario, Canada.
Have the complete front and rear suspension and if any other part is needed, I will include that too at a very reasonable price.
Last edited by Imo000; 09-08-2012 at 10:24 PM.
#5
Three Wheelin'
Approximate shipping to NC? I'm VERY interested! What about rotors?
Last edited by Jon B.; 09-05-2012 at 04:54 PM.
#6
Man of many SIGs
Rennlist Member
Rennlist Member
This is a great deal for someone. I would buy them but I already have enough to convert all of my cars. Imre is a very honest seller as well. I have had very positive dealings with him in the past.
#7
Captain Obvious
Super User
Super User
Thread Starter
PM never arrived.
I'll remove the parts from the cross members starting tomorrow and weigh them. Then I can figure out an estimated shipping cost.
The rotors were machined when the suspension was removed (that's when I put the new pads on), but they now have surface rust from being outside. However all that should come off in a day or two driving. If you want them(I would have no problem using them for myself), I will throw them at no cost, if you cover the extra cost of shipping.
I'll remove the parts from the cross members starting tomorrow and weigh them. Then I can figure out an estimated shipping cost.
The rotors were machined when the suspension was removed (that's when I put the new pads on), but they now have surface rust from being outside. However all that should come off in a day or two driving. If you want them(I would have no problem using them for myself), I will throw them at no cost, if you cover the extra cost of shipping.
Trending Topics
#8
Three Wheelin'
Awesome, going to PM.
#9
Team Owner
send the parts greyhound it will cost about 100.00
#11
Captain Obvious
Super User
Super User
Thread Starter
#12
Three Wheelin'
Honestly, that's really all I was after as well. Considering you actually tried contacting him first, and shipping would be less of a hassle to NY than NC, you are more than welcome to them. I'm in no hurry at all.
#13
Three Wheelin'
Jon, Thanks. My thought was to update to the S4 suspension componants so I could use S4 brakes but I was able to find a set of early non-S spindles on Ebay today (cheap) so I bought them (fingers crossed). As my car already has the adjustable Bilsteins on it the spindle option seems an easier way to go.
Imre,
I sent you a PM, if you didn't get it again let me know.
Imre,
I sent you a PM, if you didn't get it again let me know.