1978 Nutmeg Brown on CL for cheap
06-15-2012, 09:32 PM
#32
Basic Sponsor
Rennlist
Site Sponsor
Rennlist
Site Sponsor
Moment of truth - Lizard is stopping by to check her out this afternoon. Hope he will post his findings here good or bad.
Two choices - 1) can the AC be brought back to life and is she drivable 2500 miles = long weekend with my bride seeing some more of our great country.
2) No go - and can she drive onto a transporter.
Two choices - 1) can the AC be brought back to life and is she drivable 2500 miles = long weekend with my bride seeing some more of our great country.
2) No go - and can she drive onto a transporter.
__________________
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014
928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
Does it have the "Do It Yourself" manual transmission, or the superior "Fully Equipped by Porsche" Automatic Transmission?
George Layton March 2014928 Owners are ".....a secret sect of quietly assured Porsche pragmatists who in near anonymity appreciate the prodigious, easy going prowess of the 928."
06-16-2012, 01:38 AM
#34
Nordschleife Master
The car is cosmetically beautiful with very very few flaws.
Shifter bushings are toast,
TT has noise,
Alternator not charging,
Plug 8 has some loose junk and lots of carbon compared to others,
Lots of oil on lower air filter box,
Car wouldn't crank till I removed all plugs, but nothing came out of the cylinders,
Passenger window switch requires replacement,
Everything else is pretty nice but with what it needs I suggested transporting it as getting it north of the line for work is tricky and a pita for parts when he already has them there!
Shifter bushings are toast,
TT has noise,
Alternator not charging,
Plug 8 has some loose junk and lots of carbon compared to others,
Lots of oil on lower air filter box,
Car wouldn't crank till I removed all plugs, but nothing came out of the cylinders,
Passenger window switch requires replacement,
Everything else is pretty nice but with what it needs I suggested transporting it as getting it north of the line for work is tricky and a pita for parts when he already has them there!
...
06-17-2012, 08:50 PM
#41
Rennlist Member
Nice grab Roger! Looking forward to seeing what you do with it.
06-18-2012, 08:02 AM
#44
Rennlist Member
Very nice Roger ... good to see after all this time you're beginning to 'see the light'.... 
Here's an article I found to help you get through that initial grinding and bunny hopping phase ....... I've highlighted a few important sections .... you're welcome
Here's an article I found to help you get through that initial grinding and bunny hopping phase ....... I've highlighted a few important sections .... you're welcome
Last edited by Dave928S; 06-18-2012 at 08:46 AM.
