I'm sorry guys, i couldn't resist.. if you happen to need pieces/parts for seats i have 2 sets of fronts. the material on both sets are hammered, but the structures are good, padding is OK, not great bottoms are actually good, backs aren't. frames all seem good. some power parts underneath, etc too. i have some assorted plugs/wires too.

***if you're near Rochester NY, these are pickup only for $30/pair, either pair***

 

Mint?!

 

i'm sorry i couldn't resist...

 

There's a few in there somewhere..fun for the kids.

 

Mint colored?

 

I think I see a mint stuck in between that large rip on the left side seat...

 

Dibs on the mint....don't need the seats.

 

Matt,
I have been trying to source the plastic bushing that the horizontal adjustment rod sits in at the rear of the seat for some time now. This is a generally tubular part retained by a circlip and is approximately 20mm external diameter & 10mm internal diameter and about 20mm long. I think it has one part with a flat on it at one end (instead of being circular) and my remaining one is a light - med brown colour. (All this is from memory a couple of years ago). Do any of your seats have this part still attached (intact?).

I will try to hunt for a photo.
Myles

 

You paying $30 a pair to have the hauled around is certainly generous and should get you some takers.

 

How far upstate in NY are you?

 

Mikeb- i'm in Rochester between Buffalo/Syracuse.

If no takers by tomorrow, i'm going to strip them and sell off the power components. All were workign when removed, everything but switches are still on the seats.

 

When you strip them I'll take the 4 leather backs, and maybe more after a chat.

 

if the local person that is interested doesn't respond by tomorrow, i'll strip them and sell all the power hardware for $30 per seat plus ship.

 

im interest in the gray pair if still available

 

I have a feeling that you are just shy of eight years too late. But it would be so funny if you are not!