Hard to track short in hatch alarm
#1
Pro
Thread Starter
Join Date: Dec 2010
Location: Palgrave, Ontario, Canada
Posts: 700
Likes: 0
Received 2 Likes
on
2 Posts
Hard to track short in hatch alarm
I have just replaced the male housing on my rear hatch latch with a used one (see my 928OC profile). In dismantling the donor latch to replace the lock with my original, I found that the donor lock alarm connections had a short between two of the three wires. This would only have been detectable if the latch was removed and dismantled:
Fortunately my original was fine, but I thought I would share in case someone is having an alarm issue.
Fortunately my original was fine, but I thought I would share in case someone is having an alarm issue.