Duc's Mega Squirt Install
#18
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
What was rail were you using to measure in that picture then?![popcorn](https://rennlist.com/forums/images/smilies/popcorn.gif)
If you dont care about idle, move the injectors to a higher point on the legs![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
I still think stock rail would clear it due to the extra length from the old style injectors with the hoses.
relocating the coils sounds like the best choice if possible.
had a funny idea since im not sure about options with a new style rail. how about getting extension cylinders fabricated with similar groves on the outside for o-ring/circlips and similar characteristics on bottom inner side that matches the fuel rail (behold, my crappy paint skills!). not sure how viable or expensive that would be though.
![popcorn](https://rennlist.com/forums/images/smilies/popcorn.gif)
If you dont care about idle, move the injectors to a higher point on the legs
![thumbsup](https://rennlist.com/forums/graemlins/bigok.gif)
I still think stock rail would clear it due to the extra length from the old style injectors with the hoses.
relocating the coils sounds like the best choice if possible.
had a funny idea since im not sure about options with a new style rail. how about getting extension cylinders fabricated with similar groves on the outside for o-ring/circlips and similar characteristics on bottom inner side that matches the fuel rail (behold, my crappy paint skills!). not sure how viable or expensive that would be though.
#20
Captain Obvious
Super User
Super User
#22
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
To much work to move the injectors. Custom rail, or adapter works for me. Anyone know the spaing measurements between the injectors, I sold the rails after that picture was taken a few weeks ago.
#23
Man of many SIGs
Rennlist Member
Rennlist Member
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
![nono](https://rennlist.com/forums/graemlins/nono.gif)
#27
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
Today after getting the new IMI starter installed i tackled the IAC or PWM if you prefer. i picked up 2 Samco 22-19mm 90degree reducer elbows and trimmed to fit. adapted the stock mounting bracket as well. just need a few hose clamps and I'm go to go there.
![](http://i575.photobucket.com/albums/ss197/Ducman82/928/IMG_0633.jpg)
#29
Thread Starter
![Default](https://rennlist.com/forums/images/icons/icon1.gif)
I just ordered up some injectors, and when i get them i will draw up plans for some billet injector extensions to bridge the gap between the rail and the injector. 928MS has rails in stock with the right spacing. Lindsey racing makes them (in super cool red or black) but they don't know when they will get any.